R0K572011S000BE Renesas Electronics America, R0K572011S000BE Datasheet - Page 697

• Manufacturer Part Number: R0K572011S000BE
• Description: KIT STARTER FOR SH7201
• Manufacturer: Renesas Electronics America
• Series: Renesas Starter Kits (RSK)r
• Type: MCUr

Specifications of R0K572011S000BE

• Contents: CPU Board, LCD Display Module, E8 Emulator, Cable, QuickStart Guide and CD-ROM
• For Use With/related Products: SH7201
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

SH7201 Group
This LSI has an eight-channel serial communication interface with FIFO (SCIF) that supports both
asynchronous and clocked synchronous serial communication. It also has 16-stage FIFO registers
for both transmission and reception independently for each channel that enable this LSI to perform
efficient high-speed continuous communication.
16.1
• Asynchronous serial communication:
• Clocked synchronous serial communication:
• Full duplex communication: The transmitting and receiving sections are independent, so the
• On-chip baud rate generator with selectable bit rates
• Internal or external transmit/receive clock source: From either baud rate generator (internal) or
R01UH0026EJ0300 Rev. 3.00
Sep 24, 2010
⎯ Serial data communication is performed by start-stop in character units. The SCIF can
⎯ Data length: 7 or 8 bits
⎯ Stop bit length: 1 or 2 bits
⎯ Parity: Even, odd, or none
⎯ Receive error detection: Parity, framing, and overrun errors
⎯ Break detection: Break is detected when a framing error is followed by at least one frame at
⎯ Serial data communication is synchronized with a clock signal. The SCIF can communicate
⎯ Data length: 8 bits
⎯ Receive error detection: Overrun errors
SCIF can transmit and receive simultaneously. Both sections use 16-stage FIFO buffering, so
high-speed continuous data transfer is possible in both the transmit and receive directions.
SCK pin (external)
Section 16 Serial Communication Interface with FIFO
communicate with a universal asynchronous receiver/transmitter (UART), an asynchronous
communication interface adapter (ACIA), or any other communications chip that employs
a standard asynchronous serial system. There are eight selectable serial data
communication formats.
the space 0 level (low level). It is also detected by reading the RxD level directly from the
serial port register when a framing error occurs.
with other chips having a clocked synchronous communication function. There is one serial
data communication format.
Features
(SCIF)
Section 16 Serial Communication Interface with FIFO (SCIF)
Page 669 of 1190