EP2AGX95EF29C4N Altera, EP2AGX95EF29C4N Datasheet - Page 236

• Manufacturer Part Number: EP2AGX95EF29C4N
• Description: IC ARRIA II GX FPGA 95K 780FBGA
• Manufacturer: Altera
• Series: Arria II GXr

Specifications of EP2AGX95EF29C4N

• Number Of Logic Elements/cells: 89178
• Number Of Labs/clbs: 3747
• Total Ram Bits: 6679
• Number Of I /o: 372
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 780-FBGA
• Family Name: Arria® II GX
• Number Of Logic Blocks/elements: 93674
• # I/os (max): 372
• Frequency (max): 500MHz
• Operating Supply Voltage (typ): 900mV
• Logic Cells: 93674
• Ram Bits: 7025459.2
• Operating Supply Voltage (min): 0.87V
• Operating Supply Voltage (max): 0.93V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 780
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

7–40
Figure 7–27. IOE Output and Output Enable Path Registers for Arria II GX Devices
Notes to
(1) You can bypass each register block of the output and output-enable paths.
(2) The write clock comes from the PLL. The DQ write clock and DQS write clock have a 90° offset between them.
Arria II Device Handbook Volume 1: Device Interfaces and Integration
Figure
7–27:
There are three registers in the DDR input registers block. Two registers capture data
on the positive and negative edges of the clock, and the third register aligns the
captured data. You can choose to use the same clock for the positive edge and
negative edge registers, or two complementary clocks (DQS/CQ for positive-edge
register and DQSn/CQn for negative-edge register). The third register that aligns the
captured data uses the same clock as the positive edge registers.
For Arria II GX devices, the resynchronization registers resynchronize the data to the
resynchronization clock domain. These registers are clocked by the resynchronization
clock that is generated by the PLL. The outputs of the resynchronization registers go
straight to the core.
For Arria II GZ devices, the resynchronization registers resynchronize the data to the
system clock domain. These registers are clocked by the resynchronization clock that
is generated by the PLL. The outputs of the resynchronization registers can go straight
to the core or to the HDR blocks, which are clocked by the divided-down
resynchronization clock.
Figure 7–27
paths. The device can bypass each block of the output and output enable path.
OE
From core
datahi
From core
datainlo
From core
Write
Clock (2)
shows the registers available in the Arria II GX output and output enable
Double Data Rate Output-Enable Registers
Output Reg Bo
Output Reg Ao
OE Reg B
OE Reg A
Double Data Rate Output Registers
D
D
D
D
DFF
DFF
DFF
DFF
Q
Q
Q
Q
OE
OE
1
0
dataout
OR2
Chapter 7: External Memory Interfaces in Arria II Devices
dataout
TRI
(Note 1)
Arria II External Memory Interface Features
DQ or DQS
December 2010 Altera Corporation