E62655RUSB Renesas Electronics America, E62655RUSB Datasheet - Page 779

• Manufacturer Part Number: E62655RUSB
• Description: EMULATOR BASE H8S/2655R W/USB
• Manufacturer: Renesas Electronics America
• Type: Microcontrollerr

Specifications of E62655RUSB

• Contents: E6000 Emulator Unit and 4 Logic Probes
• For Use With/related Products: H8S/2655R
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

If a SLEEP instruction is executed when the SSBY bit in SBYCR is set to 1, a transition is made
to software standby mode. When software standby mode is cleared by an external interrupt,
medium-speed mode is restored.
When the RES pin is driven low, a transition is made to the reset state, and medium-speed mode is
cleared. The same applies in the case of a reset caused by overflow of the watchdog timer.
When the STBY pin is driven low, a transition is made to hardware standby mode.
Figure 21.1 shows the timing for transition to and clearance of medium-speed mode.
21.4
If a SLEEP instruction is executed when the SSBY bit in SBYCR is cleared to 0, the CPU enters
sleep mode. In sleep mode, CPU operation stops but the contents of the CPU’s internal registers
are retained. Other supporting modules do not stop.
Sleep mode is cleared by a reset or any interrupt, and the CPU returns to the normal program
execution state via the exception handling state. Sleep mode is not cleared if interrupts are
disabled, or if interrupts other than NMI are masked by the CPU.
When the STBY pin is driven low, a transition is made to hardware standby mode.
supporting module clock
Bus master clock
Internal address bus
Internal write signal
,
Sleep Mode
Figure 21.1 Medium-Speed Mode Transition and Clearance Timing
SCKCR
Medium-speed mode
Rev. 5.00 Sep 14, 2006 page 749 of 1060
Section 21 Power-Down Modes
SCKCR
REJ09B0331-0500