DF2117VLP20V Renesas Electronics America, DF2117VLP20V Datasheet - Page 381

• Manufacturer Part Number: DF2117VLP20V
• Description: IC H8S/2117 MCU FLASH 145TFLGA
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VLP20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 145-TFLGA
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2166 - DEV EVAL KIT H8S/2166
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

TDPCSR is set to 1. TDPPDMX must always be accessed in 16-bit units and cannot be accessed
in 8-bit units. TDPPDMX is initialized to H'FFFF.
12.3.5
TDPPDMN is a 16-bit readable/writable register. When the TDPMDS bit in TDPCR1 is set to 1
(cycle measurement mode), TDPPDMN is available as a cycle lower limit register.
In cycle measurement mode, TDPPDMN can be used to set the lower limit value of measurement
period. When the third edge (the first edge of the next period) of the measurement period is
detected, the TDPCNT value is transferred to TDPICR and the values of TDPICR and TDPPDMN
are compared. If the TDPICR value is less than the TDPPDMN value, the TPDMNUDF flag in
TDPCSR is set to 1. TDPPDMN must always be accessed in 16-bit units and cannot be accessed
in 8-bit units. TDPPDMN is initialized to H'0000.
12.3.6
TDPICR is a 16-bit read-only register. In timer mode, the TDPCNT value is transferred to
TDPICR on the edge selected by the IEDG bit in TDPCR1, and the ICPF flag in TDPCSR is set to
1. In cycle measurement mode, the TDPCNT value is transferred to TDPICR when the first edge
of the measurement period is detected. At the same time, the ICPF flag in TDPCSR is set to 1.
TDPICR must always be accessed in 16-bit units and cannot be accessed in 8-bit units. TDPICR is
initialized to H'0000.
12.3.7
TDPICRF is a 16-bit read-only register. TDPICRF can be used as a TDPICR buffer register.
When input capture occurs, the TDPICR value is transferred to TDPICRF.
TDPICRF must always be accessed in 16-bit units and cannot be accessed in 8-bit units.
TDPICRF is initialized to H'0000.
12.3.8
TDPCSR indicates the status flags and selects the external clock edge.
TDP Cycle Lower Limit Register (TDPPDMN)
TDP Input Capture Register (TDPICR)
TDP Input Capture Buffer Register (TDPICRF)
TDP Status Register (TDPCSR)
Section 12 16-Bit Duty Period Measurement Timer (TDP)
Rev. 3.00 Sep. 28, 2009 Page 335 of 910
REJ09B0350-0300