DF2117VLP20V Renesas Electronics America, DF2117VLP20V Datasheet - Page 827

• Manufacturer Part Number: DF2117VLP20V
• Description: IC H8S/2117 MCU FLASH 145TFLGA
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2117VLP20V

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: FIFO, I²C, LPC, SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 112
• Program Memory Size: 160KB (160K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 145-TFLGA
• For Use With: HS0005KCU11H - EMULATOR E10A-USB H8S(X),SH2(A)3DK2166 - DEV EVAL KIT H8S/2166
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

The list of registers gives information on the on-chip register addresses, how the register bits are
configured, the register states in each operating mode, the register selection condition, and the
register address of each module. The information is given as shown below.
1. Register addresses (address order)
2. Register bits
• Bit configurations of the registers are described in the same order as the register addresses in
3. Register states in each operating mode
• The register states described here are for the basic operating modes. If there is a specific reset
4. Register selection conditions
5. Register addresses (classification by type of module)
• The register addresses are described by modules
• Registers are listed from the lower allocation addresses.
• For the addresses of 16 bits, the MSB is described.
• Registers are classified by functional modules.
• The access size is indicated.
• H8S/2140B Group compatible register addresses or extended register addresses are
selected depending on the RELOCATE bit in system control register 3 (SYSCR3).
When the extended register addresses are selected, the some register addresses of ICC_1,
TMR_Y, PWMX_0, and PORT are changed. Therefore, the selection with other module
registers that share the same addresses with these registers is not necessary.
section 25.1, Register Addresses (Address Order).
• Reserved bits are indicated by ⎯ in the bit name column.
• The bit number in the bit-name column indicates that the whole register is allocated as a
counter or for holding data.
• Each line covers eight bits, and 16-bit register is shown as 2 lines, respectively.
• Register states are described in the same order as the register addresses in section 25.1,
Register Addresses (Address Order).
for an on-chip peripheral module, see the section on that on-chip peripheral module.
• Register selection conditions are described in the same order as the register addresses in
section 25.1, Register Addresses (Address Order).
• For register selection conditions, see section 3.2.2, System Control Register (SYSCR),
section 3.2.3, Serial Timer Control Register (STCR), section 24.1.3, Module Stop Control
Register H, L, A, and B (MSTPCRH, MSTPCRL, MSTPCRA, MSTPCRB), or register
descriptions for each module.
Section 25 List of Registers
Rev. 3.00 Sep. 28, 2009 Page 781 of 910
Section 25 List of Registers
REJ09B0350-0300