MCF5282CVF80J Freescale Semiconductor, MCF5282CVF80J Datasheet - Page 124

• Manufacturer Part Number: MCF5282CVF80J
• Description: IC MPU 512K FLASH 256MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF528xr

Specifications of MCF5282CVF80J

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 150
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Processor Series: MCF528x
• Core: ColdFire V2
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: NNDK-MOD5282-KIT
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No

ColdFire Flash Module (CFM)
6.3.4.4
The CFMPROT specifies which Flash logical sectors are protected from program and erase operations.
The CFMPROT register is always readable and only writeable when LOCK = 0. To change which logical
sectors are protected on a temporary basis, write CFMPROT with a new value after the LOCK bit in
CFMCR has been cleared. To change the value of CFMPROT that will be loaded on reset, the protection
byte in the Flash configuration field must first be temporarily unprotected using the method just described
before reprogramming the protection bytes. Then the Flash Protection longword at offset 0x1D_0400 must
be written with the desired value.
The CFMPROT controls the protection of thirty-two 16-Kbyte Flash logical sectors in the 512-Kbyte
Flash array.
logical sector.
6-12
Address
Reset
Reset
Field
Field
R/W
R/W
31–0
Bits
Note: The CFMPROT register is loaded at reset from the Flash Program/Erase Sector Protection longword
stored at the array base address + 0x0000_0400.
CFM Protection Register (CFMPROT)
Figure 6-8
31
15
Since the MCF5281 and MCF5214 devices contain a 256-Kbyte Flash, only
CFMPROT[15:0] is used.
PROT[31:0]
Name
shows the association between each bit in the CFMPROT and its corresponding
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Figure 6-7. CFM Protection Register (CFMPROT)
Sector protection. Each Flash logical sector can be protected from program and
erase operations by setting its corresponding PROT bit.
1 Logical sector is protected.
0 Logical sector is not protected.
Table 6-7. CFMPROT Field Descriptions
IPSBAR + 0x1D_0010
NOTE
See Note
See Note
PROT
PROT
R/W
R/W
Description
Freescale Semiconductor
16
0