SAM9G45 Atmel Corporation, SAM9G45 Datasheet - Page 383

• Manufacturer Part Number: SAM9G45
• Manufacturer: Atmel Corporation

Specifications of SAM9G45

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

28.4.3
Register Name:
Access Type:
• RECERR0: Recoverable Error
0 = No Errors Detected.
1 = Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected.
• ECCERR0: ECC Error
0 = No Errors Detected.
1 = A single bit error occurred in the ECC bytes.
If TYPECORRECT = 0, read both ECC Parity 0 and ECC Parity 1 registers, the error occurred at the location which con-
tains a 1 in the least significant 16 bits; else read ECC Parity 0 register, the error occurred at the location which contains a
1 in the least significant 24 bits.
• MULERR0: Multiple Error
0 = No Multiple Errors Detected.
1 = Multiple Errors Detected.
• RECERR1: Recoverable Error in the page between the 256th and the 511th bytes or the 512th and the 1023rd
Fixed to 0 if
0 = No Errors Detected.
1 = Errors Detected. If MUL_ERROR is 0, a single correctable error was detected. Otherwise multiple uncorrected errors
were detected.
• ECCERR1: ECC Error in the page between the 256th and the 511th bytes or the 512th and the 1023rd bytes
Fixed to 0 if
0 = No Errors Detected.
1 = A single bit error occurred in the ECC bytes.
Read ECC Parity 1 register, the error occurred at the location which contains a 1 in the least significant 24 bits.
• MULERR1: Multiple Error in the page between the 256th and the 511th bytes or the 512th and the 1023rd bytes
Fixed to 0 if
0 = No Multiple Errors Detected.
1 = Multiple Errors Detected.
6438G–ATARM–19-Apr-11
bytes
31
23
15
–
–
–
7
–
ECC Status Register 1
TYPECORREC = 0.
TYPECORREC = 0
TYPECORREC = 0.
MULERR7
MULERR5
MULERR3
MULERR1
30
22
14
ECC_SR1
Read-only
6
ECCERR7
ECCERR5
ECCERR3
ECCERR1
29
21
13
5
RECERR7
RECERR5
RECERR3
RECERR1
28
20
12
4
27
19
11
–
–
–
–
3
MULERR6
MULERR4
MULERR2
MULERR0
26
18
10
2
ECCERR6
ECCERR4
ECCERR2
ECCERR0
25
17
9
1
SAM9G45
RECERR6
RECERR4
RECERR2
RECERR0
24
16
8
0
383