SAM9G45 Atmel Corporation, SAM9G45 Datasheet - Page 942

• Manufacturer Part Number: SAM9G45
• Manufacturer: Atmel Corporation

Specifications of SAM9G45

• Flash (kbytes): 0 Kbytes
• Pin Count: 324
• Max. Operating Frequency: 400 MHz
• Cpu: ARM926
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 160
• Ext Interrupts: 160
• Usb Transceiver: 3
• Usb Speed: Hi-Speed
• Usb Interface: Host, Device
• Spi: 2
• Twi (i2c): 2
• Uart: 5
• Lin: 4
• Ssc: 2
• Ethernet: 1
• Sd / Emmc: 2
• Graphic Lcd: Yes
• Video Decoder: No
• Camera Interface: Yes
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 440
• Resistive Touch Screen: Yes
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 64
• Self Program Memory: NO
• External Bus Interface: 2
• Dram Memory: DDR2/LPDDR, SDRAM/LPSDR
• Nand Interface: Yes
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 0.9 to 1.1
• Fpu: No
• Mpu / Mmu: No/Yes
• Timers: 6
• Output Compare Channels: 6
• Input Capture Channels: 6
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

• EOCXp: End of Conversion X Position
0 = The pressure measurement is disabled or the Xp conversion is not finished.
1 = The pressure measurement is enabled and the Xp conversion is complete
• EOCZ1: End of Conversion Z1 Measure
0 = The pressure measurement is disabled or the Z1 conversion is not finished.
1 = The pressure measurement is enabled and the Z1 conversion is complete
• EOCZ2: End of Conversion Z2 Measure
0 = The pressure measurement is disabled or the Z2 conversion is not finished.
1 = The pressure measurement is enabled and the Z2 conversion is complete
• OVREXP: Overrun Error on X Position
0 = No overrun error on the XP measure channel.
1 = There has been an overrun error on the XP measure channel.
• OVREZ1: Overrun Error on Z1 Measure
0 = No overrun error on the Z1 measure channel.
1 = There has been an overrun error on the Z1 measure channel.
• OVREZ2: Overrun Error on Z2 Measure
0 = No overrun error on the Z2 measure channel.
1 = There has been an overrun error on the Z2 measure channel.
SAM9G45
942
6438G–ATARM–19-Apr-11