tm1300 NXP Semiconductors, tm1300 Datasheet - Page 161
tm1300
Manufacturer Part Number
tm1300
Description
Tm-1300 Media Processor
Manufacturer
NXP Semiconductors
Datasheet
1.TM1300.pdf
(533 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
- Current page: 161 of 533
- Download datasheet (7Mb)
Philips Semiconductors
Table 11-2. Field values for Command Register
EM (Enable mastering). This bit controls the TM1300
PCI interface’s ability to act as a PCI master. A value of
’0’ prevents the PCI interface from initiating PCI access-
es; a value of ’1’ allows the PCI interface to initiate PCI
accesses.
Note that the EM bit is automatically set to ’1’ whenever
the HE bit in the BIU_CTL register is set to ’1’ (see
tion 11.7.5, “BIU_CTL
abled for TM1300 to serve as PCI host processor.
EM is set to ’0’ at power-up. Host system software can
set this bit to ’1’ with a configuration write.
SC (Special cycle). This bit controls PCI device recog-
nition of special-cycle operations. A value of ’0’ causes a
PCI device to ignore all special cycles; a value of ’1’ al-
lows a PCI device to monitor special cycle operations.
This bit is hardwired to ’0’ in TM1300.
MWI (Memory write and invalidate). This bit deter-
mines a PCI device’s ability to generate memory-write-
and-invalidate commands. A value of ’1’ allows a PCI de-
vice to generate memory-write-and-invalidate com-
mands; a value of ’0’ forces the PCI device to use mem-
ory-write commands instead. TM1300 implements this
bit. The conditions under which TM1300 DMA transac-
tions generate memory-write-and-invalidate are de-
scribed in
tails of operation can be found in
Line Size Register.”
ways use regular memory-write transactions.
VGA (VGA palette snoop). This bit controls how VGA-
compatible PCI devices handle accesses to their palette
registers. This bit is hardwired to ’0’.
Figure 11-4. Status register format.
Reserved Write ignored; reads return 0
SERR#
Field
MWI
VGA
MA
EM
Par
I/O
SC
FB
Status Register
Section 11.7.16, “DMA_CTL Register.”
Hardwired to 0 (ignore I/O space accesses)
0
1
0
1
Hardwired to 0 (ignore special cycle accesses)
0
1
Hardwired to 0
0
1
0
1
0
1
no recognition of memory-space accesses
recognizes memory-space accesses
cannot act as PCI initiator
can act as PCI initiator
cannot generate memory write and invalidate
can generate memory write and invalidate
ignore parity errors
acknowledge parity errors
disable driver for serr# pin
enable driver for serr# pin
fast back-to-back only to same agent
fast back-to-back to different agents
Image Coprocessor DMA writes al-
Register”). Mastering must be en-
Value Explanation
DPE
15
SSE
14
Section 11.6.7, “Cache
RMA
13
RTA
12
STA
11
DEVSEL
10
Sec-
De-
9
DPD
8
PAR (Parity error response). This bit controls signaling
of parity errors (data or address). A value of ’0’ causes
the PCI interface to ignore parity errors; a value of ’1’
causes the PCI interface to report parity errors on the
perr# PCI signal. This bit is set to ’0’ at power-up; since
the PCI interface checks parity, software can set this bit
to ’1’ with a configuration write.
Wait (Wait-cycle control). This bit controls whether or
not a PCI device does address/data stepping. PCI devic-
es that never do stepping must hardwire this bit to 0.
Since TM1300 does not implement stepping, this bit is
hardwired to ’0’.
SERR# (serr# enable). This bit enables the driver of the
serr# pin (system error): a value of ’0’ disables it, a value
of ’1’ enables it. All PCI devices that have an serr# pin
must implement this bit. This bit is set to ’0’ after reset; it
can be set to ’1’ with a configuration write. SERR# and
PAR must both be set to ’1’ to allow signaling of address
parity errors on the serr# signal.
FB (Fast back-to-back enable). This bit controls wheth-
er or not a PCI master can do fast back-to-back transac-
tions to different devices. A value of ’0’ means fast back-
to-back transactions are only allowed when the transac-
tions are to the same agent; a value of ’1’ means the
master is allowed to generate fast back-to-back transac-
tions to different agents. Initialization software will set
this bit if all targets are capable of fast back-to-back
transactions. In TM1300, this bit is hardwired to ’0’.
Reserved. Reads from reserved bits returns ’0’; writes to
reserved bits cause no action.
11.6.4
The status register is used to record information about
PCI bus events. The status register format is shown in
Figure
Reserved. Reads from reserved bits return ’0’; writes to
reserved bits cause no action.
66M (66-MHz capable). This bit is hardwired to ’0’ for
TM1300 (PCI runs at 33-MHz maximum).
UDF (user-definable features). Since the TM1300 PCI
interface does not implement PCI user-definable fea-
tures, this bit is hardwired to ’0’.
FBC (Fast back-to-backcapable). The TM1300 PCI in-
terface does not support fast back-to-back capability, so
this bit is hardwired to ’0’.
DPD (Data parity detected). Since the TM1300 PCI in-
terface can act as a PCI bus initiator, this bit is imple-
mented. DPD is set in the initiator’s status register when:
• The PAR (parity-error response) bit in the command
PRODUCT SPECIFICATION
FBC
register is set, and
7
UDF
11-4.
6
Status Register
66M
Table 11-3
5
4
Reserved
lists the Status register fields.
0
PCI Interface
11-5
Related parts for tm1300
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Tm Supirbuck Highly Integrated 4a Wide-input Voltage, Synchronous Buck Regulator
Manufacturer:
International Rectifier Corp.
Datasheet:
Part Number:
Description:
NXP Semiconductors designed the LPC2420/2460 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
NXP Semiconductors designed the LPC2458 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
NXP Semiconductors designed the LPC2468 microcontroller around a 16-bit/32-bitARM7TDMI-S CPU core with real-time debug interfaces that include both JTAG andembedded trace
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
NXP Semiconductors designed the LPC2470 microcontroller, powered by theARM7TDMI-S core, to be a highly integrated microcontroller for a wide range ofapplications that require advanced communications and high quality graphic displays
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
NXP Semiconductors designed the LPC2478 microcontroller, powered by theARM7TDMI-S core, to be a highly integrated microcontroller for a wide range ofapplications that require advanced communications and high quality graphic displays
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The Philips Semiconductors XA (eXtended Architecture) family of 16-bit single-chip microcontrollers is powerful enough to easily handle the requirements of high performance embedded applications, yet inexpensive enough to compete in the market for hi
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The Philips Semiconductors XA (eXtended Architecture) family of 16-bit single-chip microcontrollers is powerful enough to easily handle the requirements of high performance embedded applications, yet inexpensive enough to compete in the market for hi
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The XA-S3 device is a member of Philips Semiconductors? XA(eXtended Architecture) family of high performance 16-bitsingle-chip microcontrollers
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The NXP BlueStreak LH75401/LH75411 family consists of two low-cost 16/32-bit System-on-Chip (SoC) devices
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The NXP LPC3130/3131 combine an 180 MHz ARM926EJ-S CPU core, high-speed USB2
Manufacturer:
NXP Semiconductors
Datasheet:
Part Number:
Description:
The NXP LPC3141 combine a 270 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
Part Number:
Description:
The NXP LPC3143 combine a 270 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
Part Number:
Description:
The NXP LPC3152 combines an 180 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors
Part Number:
Description:
The NXP LPC3154 combines an 180 MHz ARM926EJ-S CPU core, High-speed USB 2
Manufacturer:
NXP Semiconductors