PNX1500E NXP Semiconductors, PNX1500E Datasheet - Page 487

PNX1500E

Manufacturer Part Number
PNX1500E
Description
Manufacturer
NXP Semiconductors
Datasheet

Specifications of PNX1500E

Lead Free Status / Rohs Status
Not Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PNX1500E
Manufacturer:
NORTEL
Quantity:
1 000
NXP Semiconductors
Volume 1 of 1
PNX15XX_PNX952X_SER_N_4
Product data sheet
1.4.1 8-Bit Sample Packing Mode
1.4.2 16-bit Sample Packing Mode
1.4.3 32-bit Sample Mode
1.5 Record Capture Mode
1.6 Message Passing Mode
Sample data received on fgpi_data[7:0] will be packed into one 32-bit word as follows:
sample 1 to word[7:0]
sample 2 to word[15:8]
sample 3 to word[23:16]
sample 4 to word [31:24]
Sample data received on fgpi_data[15:0] will be packed into one 32-bit word as
follows:
sample 1 to word[15:0]
sample 2 to word[31:16]
Sample data received on fgpi_data[31:0] will pass to word[31:0].
This mode allows the FGPI to receive and store structured record data. The start of a
record may be triggered by a transition on the fgpi_start (fgpi_rec_start) pin. The
active transition is programmed in the FGPI_CTL register bits [3:2].
Recording starts at a new location in the current buffer for each record received.
Successive records are stored in the current buffer until the programmed number of
records a buffer contains is reached. At this time the next buffer is activated and
subsequent records are loaded into that buffer.
A buffer sync recording mode is available. This mode will switch between alternate
buffers on each active transition on the fgpi_stop (fgpi_buf_sync) pin. The active
transition is programmed in the FGPI_CTL register bits [7:5]. This allows recording of
video frames consisting of multiple line records synchronized by a frame sync of field
sync signal.
A continuous raw capture mode is available when FGPI_CTL register bits [7:5] ==
100 and bits [4:3] = 10. In this mode data is captured when ever fgpi_d_valid is
asserted high.
In message passing mode the FGPI can act as a receiver of data from the FGPO
output from another PNX15xx/952x Series processor. The FGPI can also receive
data from a PNX1300 Series VO output in message passing mode.
Rev. 4.0 — 03 December 2007
Chapter 14: FGPI: Fast General Purpose Interface
PNX15xx/952x Series
© NXP B.V. 2007. All rights reserved.
14-487

Related parts for PNX1500E