PNX1500E NXP Semiconductors, PNX1500E Datasheet - Page 634

• Manufacturer Part Number: PNX1500E
• Manufacturer: NXP Semiconductors

Specifications of PNX1500E

• Lead Free Status / Rohs Status: Not Compliant

NXP Semiconductors
Volume 1 of 1
Table 13: Source Linear
Table 14: Destination Linear
PNX15XX_PNX952X_SER_N_4
Product data sheet
Bit
Offset 0x04 F40C
31:24
23:16
15:8
7:0
Bit
Offset 0x04 F410
31:24
23:16
15:8
7:0
Symbol
Reserved
Adr[22:16]
Adr[15:8]
Adr[7:0]
Symbol
Reserved
Adr[22:16]
Adr[15:8]
Adr[7:0]
Source Linear
Destination Linear
When Depth is 16, PFormat[3] enables dithering the results of an alpha blend
operation. All alpha blend operations are done with 8 bits of precision for each
component. The components of the source pixels are expanded to 8 bits by
replicating the high-order bits into the low-order bits. The results of the computations
can be thought of as being in fixed point, with 3, 4, 5 or 6 bits of precision to the left of
the decimal point, depending on the component and color format. When dithering is
enabled, a 4x4 dither is applied by adding a constant fraction to each component and
truncating the results to fit in the resulting pixel. The constant fraction is taken from
the following table, based on the X and Y coordinates of the destination pixel.
Table 12: Dithering
This register is used to load the linear source address for a BLT operation.
It must be loaded with a pixel aligned address. Note that loading the SrcXY register
actually causes this register to be loaded with the proper linear pixel address.
This register is interpreted as a byte address, except during a monochrome host to
screen bit BLT, or a 4-bit or 8-bit expand alpha BLT. In the monochrome BLT case,
Adr[4:0] specifies the first valid bit within the first
Adr[4:3] specifies the correct byte and Adr[2:0] specify the correct bit. In the 4-bit
expand case, Adr[3:0] specifies the first valid nibble within the alpha data transferred
by the host. In the 8-bit expand case, Adr[2:0] specifies the first valid byte within the
alpha data transferred by the host. This register is unchanged by drawing operations.
Format
Y mod 4 = 0
Y mod 4 = 1
Y mod 4 = 2
Y mod 4 = 3
Acces
s
R/W
R/W
R/W
Acces
s
R/W
R/W
R/W
Value
-
-
-
Value
0
0
0
Rev. 4.0 — 03 December 2007
X mod 4 = 0
7/8
1/8
5/8
3/8
Description
Used to load the linear source address for a BLT operation.
Description
Used to load the starting linear pixel address for a vector or the
destination linear address for a BLT operation.
X mod 4 = 1
3/8
5/8
7/8
1/8
PNX15xx/952x Series
DWORD
Chapter 20: 2D Drawing Engine
X mod 4 = 2
1/8
7/8
3/8
5/8
transferred by the host.
© NXP B.V. 2007. All rights reserved.
X mod 4 = 3
5/8
3/8
1/8
7/8
20-634