mc9s12xd256 Freescale Semiconductor, Inc, mc9s12xd256 Datasheet - Page 965

• Manufacturer Part Number: mc9s12xd256
• Description: Hcs12x Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

23.0.6.10 Module Routing Register
This register supports the re-routing of the CAN0, CAN4, SPI0, SPI1, and SPI2 pins to alternative
ports. This allows a software re-configuration of the pinouts of the different package options with
respect to above peripherals.
23.0.7
23.0.7.1
The BKGD pin is associated with the S12X_BDM and S12X_EBI modules. During reset, the
BKGD pin is used as MODC input.
23.0.7.2
Port A pins PA[7:0] and Port B pins PB[7:0] can be used for either general-purpose I/O, or, in 144-
pin packages, also with the external bus interface. In this case port A and port B are associated with
the external address bus outputs ADDR15–ADDR8 and ADDR7–ADDR0, respectively. PB0 is the
ADDR0 or UDS output.
23.0.7.3
Port C pins PC[7:0] and port D pins PD[7:0] can be used for either general-purpose I/O, or, in 144-
pin packages, also with the external bus interface. In this case port C and port D are associated with
the external data bus inputs/outputs DATA15–DATA8 and DATA7–DATA0, respectively.
These pins are configured for reduced input threshold in certain operating modes (refer to
S12X_EBI section).
of Modules
Number
5
4
3
2
1
Ports
BKGD Pin
Port A and B
Port C and D
The purpose of the module routing register is to provide maximum
flexibility for derivatives with a lower number of MSCAN and SPI
modules.
Port C and D are neither available in 112-pin nor in 80-pin packages.
CAN0
Table 23-68. Module Implementations on Derivatives
yes
yes
yes
yes
yes
CAN1
yes
yes
yes
—
—
MSCAN Modules
CAN2
yes
yes
—
—
—
NOTE
NOTE
CAN3
yes
—
—
—
—
CAN4
yes
yes
yes
yes
—
SPI0
yes
yes
yes
—
—
SPI Modules
SPI1
yes
yes
—
—
—
SPI2
yes
—
—
—
—