mc9s12xd256 Freescale Semiconductor, Inc, mc9s12xd256 Datasheet - Page 995

• Manufacturer Part Number: mc9s12xd256
• Description: Hcs12x Microcontrollers
• Manufacturer: Freescale Semiconductor, Inc

DDRE[7:2]
PE[7:0]
Reset
Field
24.0.5.6
Read: Anytime.
Write: Anytime.
Field
7–0
7–0
W
R
DDRE7
Port E — Port E bits 7–0 are associated with external bus control signals and interrupt inputs. These include
mode select (MODB, MODA), E clock, double frequency E clock, IRQ, and XIRQ.
When not used for any of these specific functions, Port E pins 7–2 can be used as general purpose I/O and
pins 1–0 can be used as general purpose inputs.
If the data direction bits of the associated I/O pins are set to logic level “1”, a read returns the value of the port
register, otherwise the buffered pin input state is read.
Pins 6 and 5 are inputs with enabled pull-down devices while RESET pin is low.
Pins 7 and 3 are inputs with enabled pull-up devices while RESET pin is low.
Data Direction Port E — his register controls the data direction for port E. DDRE determines whether each pin
is an input or output. A logic level “1” causes the associated port pin to be an output and a logic level “0” causes
the associated pin to be a high-impedance input.
Port E bit 1 (associated with IRQ) and bit 0 (associated with XIRQ) cannot be configured as outputs. Port E, bits
1 and 0, can be read regardless of whether the alternate interrupt function is enabled.
0 Associated pin is configured as input.
1 Associated pin is configured as output.
Note: Due to internal synchronization circuits, it can take up to 2 bus clock cycles until the correct value is read
7
0
Port E Data Direction Register (DDRE)
on PORTE after changing the DDRE register.
= Unimplemented or Reserved
DDRE6
0
6
Figure 24-8. Port E Data Direction Register (DDRE)
Table 24-8. PORTE Field Descriptions
Table 24-9. DDRE Field Descriptions
DDRE5
5
0
DDRE4
0
4
Description
Description
DDRE3
3
0
DDRE2
0
2
1
0
0
0
0
0