peb2255 Infineon Technologies Corporation, peb2255 Datasheet - Page 209

• Manufacturer Part Number: peb2255
• Description: E1/t1/j1 Framer And Line Interface Component For Long And Short Haul Applications
• Manufacturer: Infineon Technologies Corporation

TRA…
TSA4…8...
Idle Channel Code Register (Read/Write)
Value after RESET: 00
IDL7…0…
Data Sheet
IDLE
IDL7
7
0…
1…
Transparent SA4...8 Bit
0…
1…
Idle Channel Code
If channel loop back is enabled by programming LOOP.ECLB = 1, the
contents of the assigned outgoing channel on ports XL1/XL2 or
XDOP/XDON is set equal to the idle channel code selected by this
register.
Additionally, the specified pattern overwrites the contents of all
channels selected via the idle channel registers ICB1…ICB4. IDL7 is
transmitted first.
Transparent Remote Alarm
H
The Remote Alarm Bit is generated internally.
The A Bit is taken from port XDI and routed transparently
through the FALC
information of the FALC
The SA4...8 bits are generated internally.
The SA4...8 bits are taken from port XDI or from the internal
signaling controller if enabled and transparently passed
through the FALC
information of the FALC
ignored.
209
®
®
-LH without any changes. The internal
-LH without any changes. The internal
®
®
-LH (register XSW) is ignored.
-LH (registers XSW and XSA4...8) is
FALC-LH V1.3
IDL0
E1 Registers
0
PEB 2255
2000-07
(29)