MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 112

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Signal Description
3.4.5 Timer 1 and Timer 2 Pin Functions
3.4.6 Queued Analog-to-Digital Converter (QADC) Pin Functions
Advance Information
112
NOTE:
The timer modules can support up to four external pins each.
Only the pins associated with each timer are controlled by the register
bits for the corresponding timer.
Full timer port pin functions are supported.
The default reset value for PUPT is 0. Thus, the pullup function is
disabled by default.
The sync input is tied off and this function is not supported.
This implementation is a limited pin out version of the original QADC.
Limiting the number of pins lowers the over all pin count of the complete
package. The lower pin count is achieved by utilizing 8 of 16 pins of the
original full pin set. The available pins are, PQA4–PQA3, PQA1–PQA0,
and PQB3–PQB0. All of the original functionality of the module is
implemented with exception of limiting the total number of multiplexed
channels. By using four external multiplexer chips, the maximum
number of channels is 18. In nonmultiplexed mode, the maximum
number of channels is eight.
•
•
Freescale Semiconductor, Inc.
For More Information On This Product,
PUPT register bit enables internal weak pad pullup devices.
Default disables pullups.
RDPT register bit controls reduced drive function of output buffers.
Default is full drive.
Go to: www.freescale.com
Signal Description
MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
MOTOROLA