MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 595

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
MOTOROLA
SWO — Software Debug Occurrence Flag
TO — Trace Count Occurrence Flag
FRZO — FIFO Freeze Occurrence Flag
SQB — Sequential Breakpoint B Arm Occurrence Flag
SQA — Sequential Breakpoint A Arm Occurrence Flag
PM1 and PM0 — Processor Mode Field
SWO bit is set when the processor enters debug mode of operation
as a result of the execution of the BKPT instruction. This bit is cleared
on test logic reset or when debug mode is exited with the GO and EX
bits set.
TO is set when the trace counter reaches zero with the trace mode
enabled and the CPU enters debug mode. This bit is cleared on test
logic reset or when debug mode is exited with the GO and EX bits set.
FRZO is set when a FIFO freeze occurs. This bit is cleared on test
logic reset or when debug mode is exited with the GO and EX bits set.
SQB is set when sequential operation is enabled and a memory
breakpoint B event has occurred to enable trace counter operation.
This bit is cleared on test logic reset or when debug mode is exited
with the GO and EX bits set.
SQA is set when sequential operation is enabled and a memory
breakpoint A event has occurred to enable memory breakpoint B
operation. This bit is cleared on test logic reset or when debug mode
is exited with the GO and EX bits set.
These flags reflect the processor operating mode. They allow
coordination of the OnCE controller with the CPU for synchronization.
Freescale Semiconductor, Inc.
For More Information On This Product,
JTAG Test Access Port and OnCE
and PM0
PM1
Go to: www.freescale.com
Table 22-7. Processor Mode Field Settings
00
01
10
11
Processor in normal mode
Processor in stop, doze, or wait mode
Processor in debug mode
Reserved
Meaning
JTAG Test Access Port and OnCE
Functional Description
Advance Information
595