R5F213J6CNNP#U0 Renesas Electronics America, R5F213J6CNNP#U0 Datasheet - Page 510

• Manufacturer Part Number: R5F213J6CNNP#U0
• Description: MCU 1KB FLASH 32K ROM 36-QFN
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/3JCr

Specifications of R5F213J6CNNP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-WQFN Exposed Pad, 36-HWQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/3JC Group
REJ09B0602-0100 Rev.1.00
May 12, 2010
Figure 23.15
23.5.1
Whether a start or a stop condition has been detected is determined.
A start condition detect interrupt request is generated when the SDA2 pin changes state from high to low while
the SCL2 pin is in the high state. A stop condition detect interrupt request is generated when the SDA2 pin
changes state from low to high while the SCL2 pin is in the high state.
Because the start and stop condition detect interrupts share an interrupt control register and vector, check the
BBS bit in the U2SMR register to determine which interrupt source is requesting the interrupt.
Figure 23.15 shows the Detection of Start and Stop Conditions.
Detection of Start and Stop Conditions
5 cycles of f1 < Setting up duration
5 cycles of f1 < Holding duration
Detection of Start and Stop Conditions
(Start condition)
(Stop condition)
SDA2
SDA2
SCL2
Setting up
duration
duration
Holding
23. Serial Interface (UART2)
Page 479 of 715