R5F213J6CNNP#U0 Renesas Electronics America, R5F213J6CNNP#U0 Datasheet - Page 637

• Manufacturer Part Number: R5F213J6CNNP#U0
• Description: MCU 1KB FLASH 32K ROM 36-QFN
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/3JCr

Specifications of R5F213J6CNNP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-WQFN Exposed Pad, 36-HWQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/3JC Group
REJ09B0602-0100 Rev.1.00
May 12, 2010
30.3
Figure 30.2
Table 30.3
i = 1 or 3
1
2
3
4
5
6
Step
Comparator B1 and comparator B3 operate independently. Their operations are the same.
Table 30.3 lists the Procedure for Setting Registers Associated with Comparator B.
Figure 30.2 shows an Operating Example of Comparator Bi (i = 1 or 3).
If the analog input voltage is higher than the reference input voltage, the INTiCOUT bit in the INTCMP register is
set to 1. If the analog input voltage is lower than the reference input voltage, the INTiCOUT bit is set to 0. To use
the comparator Bi interrupt, set the INTiEN bit in the INTEN register to 1 (interrupt enabled). If the comparison
result changes at this time, a comparator Bi interrupt request is generated. Refer to 30.4 Comparator B1 and
Comparator B3 Interrupts for details of interrupts.
Select the function of pins IVCMPi and IVREFi. Refer to 7.5 Port Settings .
However, set registers and bits other than listed in step 2 and the following steps.
INTF
INTCMP
Wait for comparator stability time (100 µ s max.)
INTEN
INTiIC
Reference input voltage
Functional Description
Register
Analog input voltage (V)
INTCMP register
INTiCOUT bit in
INTiIC register
Procedure for Setting Registers Associated with Comparator B
Operating Example of Comparator Bi (i = 1 or 3)
The above applies when:
Bits INTiF1 to INTiF0 in INTF register = 00b (no filter)
INTiPL bit in the INTEN register = 0 (both edges)
i = 1 or 3
IR bit in
Select whether to enable or disable the filter.
Select the sampling clock.
INTiCP0
INTiEN
INTiPL
ILVL2 to ILVL0
IR
0
Bit
1 (operation enabled)
When using an interrupt: 1 (interrupt enabled)
When using an interrupt: Select the input polarity.
When using an interrupt: Select the interrupt priority level.
When using an interrupt: 0 (no interrupt requested: initialization)
Set to 0 by a program.
Setting Value
30. Comparator B
Page 606 of 715