R5F213J6CNNP#U0 Renesas Electronics America, R5F213J6CNNP#U0 Datasheet - Page 617

• Manufacturer Part Number: R5F213J6CNNP#U0
• Description: MCU 1KB FLASH 32K ROM 36-QFN
• Manufacturer: Renesas Electronics America
• Series: R8C/3x/3JCr

Specifications of R5F213J6CNNP#U0

• Core Processor: R8C
• Core Size: 16/32-Bit
• Speed: 20MHz
• Connectivity: I²C, LIN, SIO, SSU, UART/USART
• Peripherals: POR, PWM, Voltage Detect, WDT
• Number Of I /o: 31
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 10x10b, D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-WQFN Exposed Pad, 36-HWQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

R8C/3JC Group
REJ09B0602-0100 Rev.1.00
May 12, 2010
28.3.3.3
28.3.3.4
This trigger is selected when bits ADCAP1 to ADCAP0 in the ADMOD register are set to 10b (timer RC).
To use this function, make sure the following conditions are met.
•
•
•
•
When the IMFj bit in the TRCSR register is changed from 0 to 1, A/D conversion starts.
Refer to 19. Timer RC, 19.5 Timer Mode (Output Compare Function), 19.6 PWM Mode, 19.7 PWM2
Mode for the details of timer RC and the output compare function (timer mode, PWM mode, and PWM2
mode).
This trigger is selected when bits ADCAP1 to ADCAP0 in the ADMOD register are set to 11b (external trigger
(ADTRG)).
To use this function, make sure the following conditions are met.
•
•
•
•
When the ADTRG pin input is changed from “H” to “L” under the above conditions, A/D conversion starts.
Bits ADCAP1 to ADCAP0 in the ADMOD register are set to 10b (timer RC).
Timer RC is used in the output compare function (timer mode, PWM mode, PWM2 mode).
The ADTRGjE bit (j = A, B, C, D) in the TRCADCR register is set to 1 (A/D trigger occurs at compare match
with TRCGRj register).
The ADST bit in the ADCON0 register is set to 1 (A/D conversion starts).
Bits ADCAP1 to ADCAP0 in the ADMOD register are set to 11b (external trigger (ADTRG)).
The INT0EN bit in the INTEN register is set to 1 ((INT0 input enabled)).
The PD4_5 bit in the PD4 register is set to 0 (input mode).
The ADST bit in the ADCON0 register is set to 1 (A/D conversion starts).
Trigger from Timer RC
External Trigger
28. A/D Converter
Page 586 of 715