HD6417727F100CV Renesas Electronics America, HD6417727F100CV Datasheet - Page 952

• Manufacturer Part Number: HD6417727F100CV
• Description: SH3-DSP, LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of HD6417727F100CV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 100MHz
• Connectivity: FIFO, SCI, SIO, SmartCard, USB
• Peripherals: DMA, LCD, POR, WDT
• Number Of I /o: 104
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 2.05 V
• Data Converters: A/D 6x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 240-QFP Exposed Pad, 240-eQFP, 240-HQFP
• Cpu Family: SuperH
• Device Core Size: 32b
• Frequency (max): 100MHz
• Interface Type: SCI/USB
• Program Memory Size: Not Required
• Total Internal Ram Size: 16KB
• # I/os (max): 104
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 1.8/3.3V
• Operating Supply Voltage (max): 2.05/3.6V
• Operating Supply Voltage (min): 1.6/2.6V
• On-chip Adc: 6-chx10-bit
• On-chip Dac: 2-chx8-bit
• Instruction Set Architecture: RISC
• Operating Temp Range: -20C to 75C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 240
• Package Type: HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Compliant

Section 30 PC Card Controller (PCC)
30.2.2
The area 6 general control register (PCC0GCR) is an 8-bit readable/writable register which
controls the external buffer, resets, address A25 and A24 pins, and REG pin, and sets the PC card
type for the PC card connected to area 6. PCC0GCR is initialized by a power-on reset but retains
its value in a manual reset and in software standby mode.
Bit 7—PCC0 Buffer Control (P0DRVE): Controls the external buffer for the PC card connected
to area 6.
Bit 7: P0DRVE
0
1
Bit 6—PCC0 Card Reset (P0PCCR): Controls resets for the PC card connected to area 6.
Bit 6: P0PCCR
0
1
Bit 5—PCC0 Card Type (P0PCCT): Specifies the type of the PC card connected to area 6.
Cleared to 0 when the PC card is the IC memory card interface type; set to 1 when the PC card is
the I/O card interface type.
Bit 5: P0PCCT
0
1
Rev.6.00 Mar. 27, 2009 Page 894 of 1036
REJ09B0254-0600
Initial value:
Bit name: P0DRVE P0PCCR P0PCCT P0USE P0MMO
Area 6 General Control Register (PCC0GCR)
R/W:
Bit:
Description
High-level setting for control PCC0DRV pin of the external buffer for the PC
card connected to area 6
Low-level setting for control PCC0DRV pin of the external buffer for the PC
card connected to area 6
Description
Low-level setting for reset PCC0RESET pin for the PC card connected to
area 6
High-level setting for reset PCC0RESET pin for the PC card connected to
area 6
Description
The PC card connected to area 6 is handled as the IC memory card
interface type
The PC card connected to area 6 is handled as the I/O card interface type
R/W
7
0
R/W
6
0
R/W
5
0
R/W
4
0
R/W
D
3
0
P0PA25 P0PA24 P0REG
R/W
2
0
R/W
0
1
(Initial value)
(Initial value)
(Initial value)
R/W
0
0