NH82801FBM S L89K Intel, NH82801FBM S L89K Datasheet - Page 239

• Manufacturer Part Number: NH82801FBM S L89K
• Manufacturer: Intel

Specifications of NH82801FBM S L89K

• Lead Free Status / RoHS Status: Compliant

6.2
6.3
6.3.1
Intel
®
I/O Controller Hub 6 (ICH6) Family Datasheet
PCI Configuration Map
Each PCI function on the ICH6 has a set of PCI configuration registers. The register address map
tables for these register sets are included at the beginning of the chapter for the particular function.
Configuration Space registers are accessed through configuration cycles on the PCI bus by the
Host bridge using configuration mechanism #1 detailed in the PCI Local Bus Specification,
Revision 2.3.
Some of the PCI registers contain reserved bits. Software must deal correctly with fields that are
reserved. On reads, software must use appropriate masks to extract the defined bits and not rely on
reserved bits being any particular value. On writes, software must ensure that the values of
reserved bit positions are preserved. That is, the values of reserved bit positions must first be read,
merged with the new values for other bit positions and then written back. Note the software does
not need to perform read, merge, write operation for the configuration address register.
In addition to reserved bits within a register, the configuration space contains reserved locations.
Software should not write to reserved PCI configuration locations in the device-specific region
(above address offset 3Fh).
I/O Map
The I/O map is divided into Fixed and Variable address ranges. Fixed ranges cannot be moved, but
in some cases can be disabled. Variable ranges can be moved and can also be disabled.
Fixed I/O Address Ranges
Table 6-2
O range, there may be separate behavior for reads and writes. DMI (Direct Media Interface) cycles
that go to target ranges that are marked as “Reserved” will not be decoded by the ICH6, and will be
passed to PCI unless the Substractive Decode Policy bit is set (D31:F0:Offset 42h, bit 0). If a PCI
master targets one of the fixed I/O target ranges, it will be positively decoded by the ICH6 in
medium speed.
Address ranges that are not listed or marked “Reserved” are not decoded by the ICH6 (unless
assigned to one of the variable ranges).
shows the Fixed I/O decode ranges from the processor perspective. Note that for each I/
Register and Memory Mapping
239