NH82801FBM S L89K Intel, NH82801FBM S L89K Datasheet - Page 416

• Manufacturer Part Number: NH82801FBM S L89K
• Manufacturer: Intel

Specifications of NH82801FBM S L89K

• Lead Free Status / RoHS Status: Compliant

LPC Interface Bridge Registers (D31:F0)
10.8.3.12
416
Note: This register is symmetrical to the SMI status register.
SMI_EN—SMI Control and Enable Register
I/O Address:
Default Value:
Lockable:
Power Well:
31:19
16:15
10:8
Bit
18
17
14
13
12
11
7
6
5
Reserved
INTEL_USB2_EN — R/W.
0 = Disable
1 = Enables Intel-Specific USB2 SMI logic to cause SMI#.
LEGACY_USB2_EN — R/W.
0 = Disable
1 = Enables legacy USB2 logic to cause SMI#.
Reserved
PERIODIC_EN — R/W.
0 = Disable.
1 = Enables the ICH6 to generate an SMI# when the PERIODIC_STS bit (PMBASE + 34h, bit 14)
TCO_EN — R/W.
0 = Disables TCO logic generating an SMI#. Note that if the NMI2SMI_EN bit is set, SMIs that are
1 = Enables the TCO logic to generate SMI#.
NOTE: This bit cannot be written once the TCO_LOCK bit is set.
Reserved
MCSMI_ENMicrocontroller SMI Enable (MCSMI_EN) — R/W.
0 = Disable.
1 = Enables ICH6 to trap accesses to the microcontroller range (62h or 66h) and generate an
Reserved
BIOS Release (BIOS_RLS) — WO.
0 = This bit will always return 0 on reads. Writes of 0 to this bit have no effect.
1 = Enables the generation of an SCI interrupt for ACPI software when a one is written to this bit
NOTE: GBL_STS being set will cause an SCI, even if the SCI_EN bit is not set. Software must
Software SMI# Timer Enable (SWSMI_TMR_EN) — R/W.
0 = Disable. Clearing the SWSMI_TMR_EN bit before the timer expires will reset the timer and the
1 = Starts Software SMI# Timer. When the SWSMI timer expires (the timeout period depends upon
APMC_EN — R/W.
0 = Disable. Writes to the APM_CNT register will not cause an SMI#.
1 = Enables writes to the APM_CNT register to cause an SMI#.
is set in the SMI_STS register (PMBASE + 34h).
caused by re-routed NMIs will not be gated by the TCO_EN bit. Even if the TCO_EN bit is 0,
NMIs will still be routed to cause SMIs.
SMI#. Note that “trapped’ cycles will be claimed by the ICH6 on PCI, but not forwarded to LPC.
position by BIOS software.
SMI# will not be generated.
the SWSMI_RATE_SEL bit setting), SWSMI_TMR_STS is set and an SMI# is generated.
SWSMI_TMR_EN stays set until cleared by software.
take great care not to set the BIOS_RLS bit (which causes GBL_STS to be set) if the SCI
handler is not in place.
PMBASE + 30h
00000000h
No
Core
Intel
Description
®
I/O Controller Hub 6 (ICH6) Family Datasheet
Attribute:
Size:
Usage:
32 bit
R/W, R/W (special), WO
ACPI or Legacy