TMPM361F10FG Toshiba, TMPM361F10FG Datasheet - Page 522

• Manufacturer Part Number: TMPM361F10FG
• Manufacturer: Toshiba

Specifications of TMPM361F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Contact Us
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14Ã?14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 3
• Uart/sio (ch): 5
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

16.4
Operation Description
16.4.1.3
<RMCNC [3:0]> = 0011 (3 cycle)
trol Signal Receive Control Registers (RMCRCR1, RMCRCR2 and RMCRCR3, RMCRCR4).
(1)
Before starting receiving process, configure how to receive remote control signal using the Remote Con-
Sampling clock
After sampling
After noise
cancellation
RXIN pin
Preparation
"High" is monitored, RMC recognizes that the signal was changed to "Low" after monitoring cycles
of "Low"s specified in <RMCNC>. If "Low" is monitored, RMC recognizes that the signal was
changed to "High" after monitoring cycles of "High" specified in <RMCNC>.
<RMCNC [3:0]> = "0011" (3 cycles). Subsequent to noise cancellation, the signal is changed from
"High" to "Low" upon monitoring 3 cycles of "Low", and the signal is changed from "Low" to
"High" upon monitoring 3 cycles of "High".
Configure noise cancelling time with the RMCRCR4 <RMCNC[3:0]> bit.
Noise canceling is applied to remote control signals sampled by the sampling clock.
RMC monitors a sampled remote control signal in each rising edge of a sampling clock. If
The following figure shows how RMC operates according to the noise cancel setting of
Settings of Noise Cancelling Time
Page 498
Noise
TMPM361F10FG