TMPM361F10FG Toshiba, TMPM361F10FG Datasheet - Page 627

• Manufacturer Part Number: TMPM361F10FG
• Manufacturer: Toshiba

Specifications of TMPM361F10FG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Contact Us
• Rom (kbytes): 1024K
• Rom Type: Flash
• Ram (kbytes): 64K
• Number Of Pins: 100
• Package: LQFP(14Ã?14)
• Vcc: 3V
• Cpu Mhz: 64
• Ssp (ch) Spi: 1
• I2c/sio (ch): 3
• Uart/sio (ch): 5
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: Y
• Cs/wait Controller (ch): 4
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: 8
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 16
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: Y
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit

Table 22-6 Transfer Format for the RAM Transfer Command
Boot
ROM
RAM
22.2.9.1
1 byte
2 byte
3 byte
4 byte
5 byte
to
16 byte
17 byte
18 byte
19 byte
20 byte
21 byte
22 byte
23 byte
24 byte
25 byte
26 byte
27 byte
to
mbyte
m+ 1 byte
m+ 2 byte
m+ 3 byte
Note 1: In I/O Interface mode, the baud rate for the transfers of the first and second bytes must be 1/16 of
Note 2: In case of any negative acknowledge, the boot program returns to a state in which it waits for a com-
Note 3: The 19th to 25th bytes must be within the RAM address range from 0x2000_0400 through the end ad-
Byte
RAM Transfer
the desired baud rate.
mand code (3rd byte). In I/O Interface mode, if a communication error occurs, a negative acknowl-
edge does not occur.
dress of RAM.
Serial operation mode and baud rate
For UART mode : 0x86
For I/O Interface mode : 0x30
−
Command code (0x10)
−
Password sequence (12 bytes))
0x3F8F_FFF4 to 0x3F8F_FFFF
Check SUM value for bytes 5 to 16
−
RAM storage start address 31 to 24
RAM storage start address 23 to 16
RAM storage start address 15 to 8
RAM storage start address 7 to 0
RAM storage start address 15 to 8
RAM storage start address 7 to 0
Check SUM value for bytes 19 to 24
−
RAM storage data
Checksum value for bytes 27 to m
−
−
Data Transferred from the Controller to the
TMPM361F10FG
Page 603
Desired baud
rate (Note 1)
Baud rate
−
ACK for the serial operation mode byte
・For UART mode
- Normal acknowledge : 0x86
(The boot program aborts if the baud rate can
not be set correctly.)
・For I/O Interface mode
- Normal acknowledge :0x30
−
ACK for the command code byte (Note 2)
- Normal acknowledge : 0x10
- Negative acknowledge : 0xX1
- Communication error : 0xX8
−
−
ACK for the checksum byte (Note 2)
- Normal acknowledge : 0x10
- Negative acknowledge : 0xX1
- Communication error : 0xX8
−
−
−
−
−
−
−
ACK for the checksum byte (Note 2)
- Normal acknowledge : 0x10
- Negative acknowledge : 0xX1
- Communication error : 0xX8
−
−
ACK for the checksum byte (Note 2)
- Normal acknowledge : 0x10
- Negative acknowledge : 0xX1
- Communication error : 0xX8
Jump to RAM storage start address
Data Transferred from the TMPM361F10FG to
the Controller
TMPM361F10FG