DF2148BTE20 Renesas Electronics America, DF2148BTE20 Datasheet - Page 401

• Manufacturer Part Number: DF2148BTE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148BTE20; HD64F2148BTE20

This LSI incorporates two watchdog timer channels (WDT_0 and WDT_1). The watchdog timer
can generate an internal reset signal or an internal NMI interrupt signal if a system crash prevents
the CPU from writing to the timer counter, thus allowing it to overflow. Simultaneously, it can
output an overflow signal (RESO) externally.
When this watchdog function is not needed, the WDT can be used as an interval timer. In interval
timer operation, an interval timer interrupt is generated each time the counter overflows. A block
diagram of the WDT_0 and WDT_1 is shown in figure 14.1.
14.1
Watchdog Timer Mode:
Internal Timer Mode:
WDT0102A_010020020700
Selectable from eight (WDT_0) or 16 (WDT_1) counter input clocks.
Switchable between watchdog timer mode and interval timer mode
If the counter overflows, an internal reset or an internal NMI interrupt is generated.
When the LSI is selected to be internally reset at counter overflow, a low level signal is output
from the RESO pin if the counter overflows.
If the counter overflows, an internal timer interrupt (WOVI) is generated.
Features
Section 14 Watchdog Timer (WDT)
Rev. 3.00 Mar 21, 2006 page 345 of 788
Section 14 Watchdog Timer (WDT)
REJ09B0300-0300