DF2148BTE20 Renesas Electronics America, DF2148BTE20 Datasheet - Page 413

• Manufacturer Part Number: DF2148BTE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148BTE20; HD64F2148BTE20

14.6.2
If a timer counter clock pulse is generated during the T2 state of a TCNT write cycle, the write
takes priority and the timer counter is not incremented. Figure 14.7 shows this operation.
14.6.3
If bits CKS2 to CKS0 in TCSR are written to while the WDT is operating, errors could occur in
the incrementation. Software must stop the watchdog timer (by clearing the TME bit to 0) before
changing the values of bits CKS2 to CKS0.
14.6.4
If the mode is switched from watchdog timer to interval timer, while the WDT is operating, errors
could occur in the incrementation. Software must stop the watchdog timer (by clearing the TME
bit to 0) before switching the mode.
Conflict between Timer Counter (TCNT) Write and Increment
Changing Values of CKS2 to CKS0 Bits
Switching between Watchdog Timer Mode and Interval Timer Mode
Address
Internal write signal
TCNT input clock
TCNT
Figure 14.7 Conflict between TCNT Write and Increment
TCNT write cycle
T
1
N
T
2
Rev. 3.00 Mar 21, 2006 page 357 of 788
Section 14 Watchdog Timer (WDT)
Counter write data
M
REJ09B0300-0300