DF2148BTE20 Renesas Electronics America, DF2148BTE20 Datasheet - Page 563

• Manufacturer Part Number: DF2148BTE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148BTE20; HD64F2148BTE20

17.4.8
In this device, clearing the KBFSEL bit to 0 in KBCRH enables the KBF bit in KBCRL to be used
as a flag for the interrupt generated by the fall of KCLK input.
Figure 17.13 shows the setting method and an example of operation.
Note: * The KBF setting timing is the same as the timing of KBF setting and KCLK automatic I/O inhibit bit
(interrupt generated)
interrupts enabled)
(KCLK falling edge
Interrupt handling
(KBBR reception
KCLK Fall Interrupt Operation
generation in figure 17.11. When the KBF bit is used as the KCLK input fall interrupt flag, the
automatic I/O inhibit function does not operate.
fall detected?
KBFSEL = 0
Set KBIOE
Clear KBF
KCLK pin
disabled)
KBIE = 1
KBE = 0
KBF = 1
Start
Figure 17.13 Example of KCLK Input Fall Interrupt Operation
Yes
No
KCLK
(pin state)
KBF bit
Interrupt
generated
Rev. 3.00 Mar 21, 2006 page 507 of 788
Section 17 Keyboard Buffer Controller
Cleared
by software
REJ09B0300-0300
Interrupt
generated