DF2148BTE20 Renesas Electronics America, DF2148BTE20 Datasheet - Page 554

• Manufacturer Part Number: DF2148BTE20
• Description: IC H8S MCU FLASH 128K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2100r

Specifications of DF2148BTE20

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, SCI, X-Bus
• Peripherals: PWM, WDT
• Number Of I /o: 74
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F2148BTE20; HD64F2148BTE20

Section 17 Keyboard Buffer Controller
Rev. 3.00 Mar 21, 2006 page 498 of 788
REJ09B0300-0300
(KBBR reception prohibited)
Set I/O inhibit (KCLKO = 0)
Set I/O inhibit (KCLKO = 1)
Set start bit (KDO = 0)
and KDI bits both
Set transmit data
Set KBIOE bit
Read KBCRH
Read KBCRH
Read KBCRH
Read KBCRH
(KDO = D(i))
KCLKI = 0?
KCLKI = 1?
KCLKI = 1?
KBE = 0
i = i + 1
KCLKI
i
Start
Wait
i = 0
1?
1
9?
Yes
Yes
Yes
Yes
Yes
(Continued on next page)
Figure 17.5 (1) Sample Transmit Processing Flowchart
No
No
No
No
No
KDO remains at 1
KCLKO remains at 0
KDO remains at 0
[1]
[2]
[3]
[4]
[5]
[6]
(Continued on
next page)
2
[1] Set the KBE bit to 1 in KBCRH.
[2] Read KBCRH, and if the KCLKI and
[3] Write 0 in the KBE bit (prohibit KBBR
[4] Write 0 in the KDO bit (set start bit).
[5] Write 1 in the KCLKO bit (clear I/O
[6] Read KBCRH, and when KCLKI = 0,
[7] After transmitting the stop bit, read
[8] Read KBCRH. Confirm that the KCLKI
The transmit operation can be continued
by repeating steps [2] to [8].
i = 0 to 7: Transmit data
i = 8: Parity bit
i = 9: Stop bit
KDI bits are both 1, write 0 in the
KCLKO bit (set I/O inhibit).
receive operation).
inhibit).
set the transmit data in the KDO bit
(LSB-first). Next, set the parity bit and
stop bit in the KDO bit.
KBCRL and confirm that KDI = 0
(receive completed notification from the
keyboard).
and KDI bits are both 1.