TMP92xy21FG Toshiba, TMP92xy21FG Datasheet - Page 400

• Manufacturer Part Number: TMP92xy21FG
• Manufacturer: Toshiba

Specifications of TMP92xy21FG

• Package: LQFP144
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 16
• Architecture: 32-bit CISC
• Usb/spi Channels: -
• Uart/sio Channels: 2
• I2c/sio Bus Channels: -
• (s)dram Controller: 1
• Adc 10-bit Channel: 4
• Da Converter: -
• Timer 8-bit Channel: 4
• Timer 16-bit Channel: 1
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 82
• Power Supply Voltage(v): 3.0 to 3.6

(4) Write 16-byte redundant data
(5) Run page program
(6) Read status
(7) Repeat 1 to 6 for all other pages if required.
ND0FMCR:
ND0FDTR:
ND0FMCR:
ND0FDTR:
ND0FMCR:
Wait several states (e.g., “NOP” × 10)
ND0FSR:
ND0FMCR:
ND0FDTR:
ND0FMCR:
ND0FDTR:
D520:
D521:
D522:
D525:
D526:
D527:
92CH21-398
Set 0x9C for the data mode without ECC calculation.
Write 16-byte redundant data.
Set 0x9D for NDCLE signal enable and command mode.
Set 0x10 for the page program command.
Set 0x1C for NDALE signal disable.
Check BUSY flag. If it is 0, go to the next.
If it is 1, wait until it becomes 0.
Set 0x1D for NDCLE signal and command mode.
Set 0x70 for Status read command.
Set 0x1C for NDCLE signal disable.
Read the Status data from the NAND-Flash.
LPR [23:16]
LPR [31:24]
CPR [11:6], 2’b11
LPR [7:0]
LPR [15:8]
CPR [5:0], 2’b11
TMP92CH21
2009-06-19