UPD70F3771GF-GAT-AX Renesas Electronics America, UPD70F3771GF-GAT-AX Datasheet - Page 1027

• Manufacturer Part Number: UPD70F3771GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3771GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CAN, CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
Note During a period of a total of 11 bits, 3 bits of interframe space and 8 bits of suspend transmission, the
Cautions 1. Execute transmission abort processing by clearing the TRQ bit, not the RDY bit.
Figure 20-46. Transmission Abort Processing (Other Than in Normal Operation Mode with ABT)
transmission request may have already been acknowledged by the protocol layer.
transmission may not be aborted but started even if the TRQ bit is cleared.
2. Before making a sleep mode transition request, confirm that there is no transmission
3. The TSTAT bit can be periodically checked by a user application or can be checked after
4. Do not execute a new transmission request that includes other message buffers while
5. If data of the same message buffer are successively transmitted or if only one message
request left using this processing.
the transmit completion interrupt.
transmission abort processing is in progress.
buffer is used, judgments whether transmission has been successfully executed or failed
may contradict. In such a case, make a judgment by using the history information of the
C0TGPT register.
Wait for a period of 11 CAN
Transmission successful
Read C0LOPT register.
be aborted matches
Clear TRQ bit = 1
Message buffer to
C0LOPT register?
Set TRQ bit = 0
Clear TRQ bit.
TSTAT bit = 0?
data bits
START
END
Yes
Yes
Note
.
No
No
Transmit abort request
was successful.
CHAPTER 20 CAN CONTROLLER
Consequently,
Page 1027 of 1509