UPD70F3771GF-GAT-AX Renesas Electronics America, UPD70F3771GF-GAT-AX Datasheet - Page 817

• Manufacturer Part Number: UPD70F3771GF-GAT-AX
• Description: MCU 32BIT V850ES/JX3-H 128-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Hr

Specifications of UPD70F3771GF-GAT-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 48MHz
• Connectivity: CAN, CSI, EBI/EMI, I²C, UART/USART, USB
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 40K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 12x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JG3-H, V850ES/JH3-H
19.2 Features
R01UH0042EJ0400 Rev.4.00
Sep 30, 2010
I
• Operation stop mode
• I
(1) Operation stop mode
(2) I
2
C00 to I
2
In this mode, serial transfer is not performed, thus enabling a reduction in power consumption.
This mode is used for 8-bit data transfers with several devices via two lines: a serial clock pin (SCL0n) and a serial
data bus pin (SDA0n).
This mode complies with the I
“transfer direction specification”, “data”, and “stop condition” data for the slave device on the serial data bus. The
slave device automatically detects the received statuses and data by hardware. This function can simplify the part
of an application program that controls the I
Since SCL0n and SDA0n pins are used for N-ch open-drain outputs, I
clock line and the serial data bus line.
Remark
C (Inter IC) bus mode (multimasters supported)
2
C bus mode (multimaster support)
2
C02 have the following two modes.
n = 0 to 2
2
C bus format and the master device can generate “start condition”, “address”,
2
C bus.
2
C0n requires pull-up resistors for the serial
CHAPTER 19 I
Page 817 of 1509
2
C BUS