TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 126

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

9 Input/Output Ports
PF
(0x4000_0140)
9.2.8
specified in units of bits. Besides the general-purpose port function, the port F performs the functions of
the serial interface, the remote control signal preprocessor, the serial bus interface and the external
interrupt input.
and enable input in the PFIE register. These settings enable the interrupt input even if the
STBYCR2<DRVE> bit in the clock/mode control block is set to stop driving of pins during STOP mode.
(Note)
The port F is a general-purpose, 8-bit input/output port. For this port, inputs and outputs can be
To use the external interrupt input for releasing STOP mode, select this function in the PFFR register
Reset initializes all bits of the port F as general-purpose ports with input, output and pull-up disabled.
Port F (PF0~PF7)
Bit Symbol
Read/Write
After reset
In modes other than STOP mode, interrupt input is enabled regardless of the PxFR
register setting as long as input is enabled in PxIE. Make sure to disable unused
interrupts when programming the device.
Type
PF7
T8
7
7
PF6
T13
6
6
Under development
Port F Circuit Type
Port F register
Page114
PF5
T13
5
5
PF4
T13
4
4
R/W
“0”
PF3
T4
3
3
PF2
T16
2
2
PF1
T4
1
1
TMPM330
T10
PF0
0
0