TMPM330FWFG Toshiba, TMPM330FWFG Datasheet - Page 423

• Manufacturer Part Number: TMPM330FWFG
• Description: Microcontrollers (MCU) MCU w/ ARM Cortex-M3 128K FLASH, 8K SRAM
• Manufacturer: Toshiba

Specifications of TMPM330FWFG

• Processor Series: TX03
• Core: ARM Cortex M3
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 128K
• Rom Type: Flash
• Ram (kbytes): 8K
• Number Of Pins: 100
• Package: LQFP(14×14)
• Vcc: 3V
• Cpu Mhz: 40
• Ssp (ch) Spi: -
• I2c/sio (ch): 3
• Uart/sio (ch): 3
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: -
• Cs/wait Controller (ch): -
• Dma Controller: -
• 10-bit Da Converter: -
• 10-bit Ad Converter: 12
• 12-bit Ad Converter: -
• 16-bit Timer / Counter: 10
• Motor / Igbt Control: -
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: -
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: Y
• Comparators: -
• Low-voltage Detector: -
• Etm Hardware Trace: 4-bit
• Lead Free Status / Rohs Status: Details

11. The 45th and 46th bytes transmitted are 01H, 00H.
12. The 47th to 50th bytes, transmitted from the target board to the controller, indicate the
13. The 51st to 54th bytes, transmitted from the target board to the controller, indicate the
14. The 55th to 56th bytes, transmitted from the target board to the controller, indicate the
15. The 57th to 83rd bytes, transmitted from the target board to the controller, contain
16. The 66th byte, transmitted from the target board to the controller, is a checksum value
17. The 94th byte is the next command code.
(Note)
start address of the on-chip flash memory, are 00H, 00H, 80H, and 3FH.
end address of the on-chip flash memory. Each product has own start address shown
below.
number of flash blocks available. Each product transmits own number shown below.
information about the flash blocks. Flash blocks of the same size are treated as a
group. Information about the flash blocks indicate the start address of a group, the size
of the blocks in that group (in halfwords) and the number of the blocks in that group.
for the 5th to 92nd bytes. The checksum value is calculated by adding all these bytes
together, dropping the carry and taking the two’s complement of the total sum.
The 57th to 65th bytes are the information about the 16-kbyte blocks. The 66th to 74th
bytes are the information about the 32-kbyte blocks. The 75th to 83rd bytes are the
information about the 64-kbyte blocks. The 84th to 92nd bytes are the information
about the 128-kbyte blocks. See Table 18-8 for the values of bytes transmitted.
TMPM330FWFG
TMPM330FWFG
TMPM330FDFG
TMPM330FYFG
TMPM330FDFG
TMPM330FYFG
Product name
Product name
The flash memory actual end address of the TMPM330FYFG is
0x3F83_FFFF.
In addition to 256KB flash area, the TMPM330FYFG provides 128-word
data/ password area (0x3F87_FF00 – 0x3F87_FF80, 1 page) for Show
Product Information command.
Under development
Page411
Number of flash blocks
FFH, FFH, 87H, 3FH
FFH, FFH, 81H, 3FH
06H, 00H
06H, 00H
04H, 00H
Address
TMPM330