D6417729RHF200BV Renesas Electronics America, D6417729RHF200BV Datasheet - Page 159

• Manufacturer Part Number: D6417729RHF200BV
• Description: IC SUPER H MPU ROMLESS 208QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of D6417729RHF200BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.85 V ~ 2.15 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

2. If using software for way selection for entry replacement, write the desired value to the RC
3. Issue an LDTLB instruction to load the contents of PTEH and PTEL into the TLB.
4. Issue an RTE (return from exception handler) instruction to terminate the handler and return to
3.5.2
A TLB protection violation exception occurs when the virtual address and the address array of the
selected TLB entry are compared and a valid entry is found to match, but the type of access is not
permitted by the access rights specified in the PR field. TLB protection violation exception
handling includes both hardware and software operations.
Hardware Operations: In a TLB protection violation exception, the SH7729R hardware executes
a set of prescribed operations, as follows:
1. The VPN field of the virtual address causing the exception is written to the PTEH register.
2. The virtual address causing the exception is written to the TEA register.
3. Either exception code H'0A0 for a load access, or H'0C0 for a store access, is written to the
4. The PC value indicating the address of the instruction in which the exception occurred is
5. The contents of SR at the time of the exception are written to SSR.
6. The MD bit in SR is set to 1 to place the SH7729R in privileged mode.
7. The BL bit in SR is set to 1 to mask any further exception requests.
8. The register bank (RB) bit in SR is set to 1.
9. The way that generated the exception is set in the RC field in MMUCR.
10. Execution branches to the address obtained by adding the value of the VBR contents and
Software (TLB Protection Violation Handler) Operations: Software resolves the TLB
protection violation and issues an RTE (return from exception handler) instruction to terminate the
handler and return to the instruction stream. The RTE instruction should be issued after two
LDTLB instructions.
field in MMUCR.
the instruction stream. The RTE instruction should be issued after two LDTLB instructions.
EXPEVT register.
written into SPC (if the exception occurred in a delay slot, the PC value indicating the address
of the related delayed branch instruction is written into SPC).
H'00000100 to invoke the TLB protection violation exception handler.
TLB Protection Violation Exception
Rev. 5.0, 09/03, page 111 of 806