D6417729RHF200BV Renesas Electronics America, D6417729RHF200BV Datasheet - Page 71

• Manufacturer Part Number: D6417729RHF200BV
• Description: IC SUPER H MPU ROMLESS 208QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of D6417729RHF200BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.85 V ~ 2.15 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

2.1.1
There are sixteen 32-bit general registers (Rn), designated R0 to R15. The general registers are
used for data processing and address calculation.
With SuperH microcomputer type instructions, R0 is used as an index register. With a number of
instructions, R0 is the only register that can be used. R15 is used as the stack pointer (SP). In
exception handling, R15 is used to reference the stack when saving and restoring the status register
(SR) and program counter (PC).
With DSP type instructions, eight of the sixteen general registers are used for addressing of X and
Y data memory and data memory (single data) that uses the L-bus.
To access X memory, R4 and R5 are used as the X address register [Ax] and R8 is used as the X
index register [Ix]. To access Y memory, R6 and R7 are used as the Y address register [Ay] and
R9 is used as the Y index register [Iy]. To access single data that uses the L-bus, R2, R3, R4, and
R5 are used as the single data address register [As] and R8 is used as the single data index register
[Is].
Figure 2.3 shows the general registers, which are identical to those of the SH3, when DSP
extension is disabled.
31
General Registers
Figure 2.3 General Purpose Registers (Not in DSP Mode)
R0
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R14
R15
*
*
*
*
*
*
*
*
1
2
2
2
2
2
2
2
*
2
0
General Registers (when not in DSP mode)
Notes: 1. R0 functions as an index register in the
2. R0−R7 are banked registers. In user mode,
indexed register-indirect addressing mode
and indexed GBR-indirect addressing mode.
In some instructions, only R0 can be used as
the source register or destination register.
BANK0 is used. In privileged mode, SR.RB
specifies BANK.
SR.RB = 0; BANK0 is used
SR.RB = 1; BANK1 is used
Rev. 5.0, 09/03, page 23 of 806