D6417729RHF200BV Renesas Electronics America, D6417729RHF200BV Datasheet - Page 545

• Manufacturer Part Number: D6417729RHF200BV
• Description: IC SUPER H MPU ROMLESS 208QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of D6417729RHF200BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.85 V ~ 2.15 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

15.3
15.3.1
For serial communication, the SCI has an asynchronous mode in which characters are
synchronized individually, and a synchronous mode in which communication is synchronized with
clock pulses. Asynchronous/synchronous mode and the transmission format are selected in the
serial mode register (SCSMR), as shown in table 15.9. The SCI clock source is selected by the
combination of the C/A bit in the serial mode register (SCSMR) and the CKE1 and CKE0 bits in
the serial control register (SCSCR), as shown in table 15.10.
Asynchronous Mode:
Synchronous Mode:
Data length is selectable: 7 or 8 bits.
Parity and multiprocessor bits are selectable. So is the stop bit length (1 or 2 bits). The
combination of the preceding selections constitutes the communication format and character
length.
In receiving, it is possible to detect framing errors (FER), parity errors (PER), overrun errors
(ORER) and breaks.
An internal or external clock can be selected as the SCI clock source.
The transmission/reception format has a fixed 8-bit data length.
In receiving, it is possible to detect overrun errors (ORER).
An internal or external clock can be selected as the SCI clock source.
When an internal clock is selected, the SCI operates using the on-chip baud rate generator,
and can output a serial clock signal with a frequency matching the bit rate.
When an external clock is selected, the external clock input must have a frequency 16 times
the bit rate. (The on-chip baud rate generator is not used.)
When an internal clock is selected, the SCI operates using the on-chip baud rate generator,
and outputs a serial clock signal to external devices.
When an external clock is selected, the SCI operates on the input serial clock. The on-chip
baud rate generator is not used.
Operation
Overview
Rev. 5.0, 09/03, page 497 of 806