D6417729RHF200BV Renesas Electronics America, D6417729RHF200BV Datasheet - Page 528

• Manufacturer Part Number: D6417729RHF200BV
• Description: IC SUPER H MPU ROMLESS 208QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7700r

Specifications of D6417729RHF200BV

• Core Processor: SH-3 DSP
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.85 V ~ 2.15 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit 3—Stop Bit Length (STOP): Selects one or two bits as the stop bit length in asynchronous
mode. This setting is used only in asynchronous mode. It is ignored in synchronous mode because
no stop bits are added.
When receiving, only the first stop bit is checked, regardless of the STOP bit setting. If the second
stop bit is 1, it is treated as a stop bit, but if the second stop bit is 0, it is treated as the start bit of
the next incoming character.
Bit 3: STOP
0
1
Bit 2—Multiprocessor Mode (MP): Selects multiprocessor format. When multiprocessor format
is selected, settings of the parity enable (PE) and parity mode (O/E) bits are ignored. The MP bit
setting is used only in asynchronous mode; it is ignored in synchronous mode. For the
multiprocessor communication function, see section 15.3.3, Multiprocessor Communication.
Bit 2: MP
0
1
Bits 1 and 0—Clock Select 1 and 0 (CKS1, CKS0): Select the internal clock source of the on-
chip baud rate generator. Four clock sources are available. P , P /4, P /16, and P /64. For further
information on the clock source, bit rate register settings, and baud rate, see section 15.2.9, Bit
Rate Register (SCBRR).
Bit 1: CKS1
0
1
Note: P : Peripheral clock
Rev. 5.0, 09/03, page 480 of 806
Description
One stop bit
When transmitting, a single 1-bit is added at the end of each transmitted
character.
Two stop bits
When transmitting, two 1-bits are added at the end of each transmitted character.
Description
Multiprocessor function disabled
Multiprocessor format selected
Bit 0: CKS0
0
1
0
1
Description
P
P /4
P /16
P /64
(Initial value)
(Initial value)
(Initial value)