AT91SAM9G45-EKES Atmel, AT91SAM9G45-EKES Datasheet - Page 951

• Manufacturer Part Number: AT91SAM9G45-EKES
• Description: KIT EVAL FOR AT91SAM9G45
• Manufacturer: Atmel
• Series: AT91SAM Smart ARMr
• Type: MCUr

Specifications of AT91SAM9G45-EKES

• Contents: Board
• Processor To Be Evaluated: SAM9G45
• Data Bus Width: 32 bit
• Interface Type: I2C, SPI, UART
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 1.8 V to 3.3 V
• For Use With/related Products: AT91SAM9G45
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4626953

6438F–ATARM–21-Jun-10
If the bit PRES in
the sequences are as follow:
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
• For Trigger Counter at 0:
1. Close the switches on the inputs X
2. Convert Channel X
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
4. Set Trigger Counter to 1.
• For Trigger Counter at 1:
1. Close the switches on the inputs X
2. Convert Channel Y
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
4. Set Trigger Counter to 2.
• For Trigger Counter at 2:
1. Close the switches on the inputs X
2. Convert Channel X
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
4. Set Trigger Counter to 3.
• For Trigger Counter at 3:
1. Close the switches on the inputs X
2. Convert Channel X
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
4. Set Trigger Counter to 4.
• For Trigger Counter at 4:
1. Close the switches on the inputs X
2. Convert Channel Y
3. If Channel 4 to Channel 7 are enabled, convert Channels and store result in the corre-
4. Set Trigger Counter to 5.
sponding TSADCC_CDRx and TSADCC_LCDR.
TSADCC_LCDR if PDCEN is enabled).
sponding TSADCC_CDRx and TSADCC_LCDR.
TSADCC_LCDR if PDCEN is enabled).
sponding TSADCC_CDRx and TSADCC_LCDR.
sponding TSADCC_CDRx and TSADCC_LCDR.
result in TSADCC_CDR0 (and also in TSADCC_LCDR if PDCEN is enabled).
sponding TSADCC_CDRx and TSADCC_LCDR.
from the result and store the subtraction result in TSADCC_CDR1 (and also in
TSADCC_LCDR if PDCEN is enabled).
sponding TSADCC_CDRx and TSADCC_LCDR.
“TSADCC Mode Register”
P
P
P
M
M
, subtract TSADCC_CDR1 from the result and store the subtraction
and store the result in TSADCC_XPDR, subtract TSADCC_CDR1
and store the result in TSADCC_Z1DR (and also in
and store the result in TSADCC_Z2DR (and also in
and store the result in TSADCC_CDR1.
P
P
P
P
P
and Y
and Y
and X
and X
and X
is enabled (measure both position and pressure),
M
M
M
M
M
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
during the Sample and Hold Time.
AT91SAM9G45
951