TMP92CF26AXBG Toshiba, TMP92CF26AXBG Datasheet - Page 648

• Manufacturer Part Number: TMP92CF26AXBG
• Description: Microcontrollers (MCU) TLCS-900/H1 ROMLESS 144KB RAM
• Manufacturer: Toshiba

Specifications of TMP92CF26AXBG

• Processor Series: TLCS-900
• Core: 900/H
• Data Bus Width: 16 bit
• Program Memory Type: ROM
• Program Memory Size: 8 KB
• Data Ram Size: 144 KB
• Interface Type: I2C, I2S, UART, USB
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 136
• Number Of Timers: 10
• Maximum Operating Temperature: + 50 C
• Mounting Style: SMD/SMT
• Package / Case: FBGA-228
• Development Tools By Supplier: BM1040R0A, BM1055R0B, SW96CN0-ZCC, SW00MN0-ZCC
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 6 Channel
• Lead Free Status / Rohs Status: Details

soft start (MACCR<MOPST>=1) can be selected in MACCR<MSTTG2:0>.
set to “1”. Once an overflow occurs, MACCR<MOVF> is held at “1” regardless of subsequent
calculation results. Since the overflow flag is not automatically cleared by a read operation,
it is necessary to write “0” to clear this flag.
(2) Calculation start trigger
(3) Overflow flag
As a trigger to start calculation, writing to the MACMA, MACMB or MACOR register or
When an overflow occurs in the calculation result (see Table 3.26.2), MACCR<MOVF> is
unsigned or signed mode.
registers, and the most significant bit is treated as the sign bit and the data set in each
register is treated as a two’s complement value. Table 3.26.1 shows the range of values
that can be represented in each sign mode.
signed (two’s complement) data. Even in unsigned mode it is possible to set signed
(two’s complement) data in the MACOR register to perform additions and subtractions
in signed mode.
MACMA and MACMB register with longword (32bit).
(d) Sign mode
Unsigned
Signed
Both multiply-accumulate and multiply-subtract operations can be executed in
In signed mode, the MACMA, MACMB, and MACOR registers become signed
Use signed mode when the values to be set in the MACMA and MACMB registers are
In case of using “sign mode”, MACCR<MSGMD> = 1, it must need to write to
Signed
Unsigned
Sign Mode
Table 3.26.1 Data Range in Unsigned/Signed Mode
MACMA, MACMB Registers
Table 3.26.2 Overflow Definitions
(MACOR register value)
−2
0 ∼ 2
31
Calculation Result
−2
0 ≤ MACOR ≤ 2
∼ +2
63
MACOR > 2
MACOR > 2
MACOR < −2
32
≤ MACOR ≤2
92CF26A-645
MACOR < 0
−1
31
-1
64
63
−1
−1
64
63
63
−1
−1
MACCR<MOVF>
MACOR Register
−2
0 ∼ 2
63
∼ +2
1
0
1
1
0
1
64
−1
63
−1
TMP92CF26A
2007-11-21