AT91SAM9G45-CU Atmel, AT91SAM9G45-CU Datasheet - Page 216

• Manufacturer Part Number: AT91SAM9G45-CU
• Description: MCU ARM9 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G45-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 800 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• For Use With: AT91SAM9G45-EKES - KIT EVAL FOR AT91SAM9G45
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

21.12.2
Figure 21-32. Clock Rate Transition Occurs while the SMC is Performing a Write Operation
6438F–ATARM–21-Jun-10
internal signal from PMC
Switching from (to) Slow Clock Mode to (from) Normal Mode
Slow Clock Mode
NBS0, NBS1,
NBS2, NBS3,
A0,A1
This write cycle finishes with the slow clock mode set
A
[25:2]
NWE
MCK
NCS
of parameters after the clock rate transition
When switching from slow clock mode to the normal mode, the current slow clock mode transfer
is completed at high clock rate, with the set of slow clock mode parameters.See
page
Figure 21-33
other.
216. The external device may not be fast enough to support such timings.
SLOW CLOCK MODE WRITE
1
NWE_CYCLE = 3
illustrates the recommended procedure to properly switch from one mode to the
1
1
SLOW CLOCK MODE WRITE
1
1
Slow clock mode transition is detected:
1
Reload Configuration Wait State
2
NORMAL MODE WRITE
NWE_CYCLE = 7
AT91SAM9G45
3
2
Figure 21-32 on
216