AT91SAM9G45-CU Atmel, AT91SAM9G45-CU Datasheet - Page 263

• Manufacturer Part Number: AT91SAM9G45-CU
• Description: MCU ARM9 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G45-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 400MHz
• Connectivity: EBI/EMI, Ethernet, I²C, IrDA, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 0.9 V ~ 1.1 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 800 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: AT91
• No. Of I/o's: 160
• Ram Memory Size: 64KB
• Cpu Speed: 400MHz
• No. Of Timers: 2
• Rohs Compliant: Yes
• For Use With: AT91SAM9G45-EKES - KIT EVAL FOR AT91SAM9G45
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

• CAS: CAS Latency
The reset value is 2 cycles.
• DLL: Reset DLL
Reset value is 0.
This field defines the value of Reset DLL.
0 = Disable DLL reset.
1 = Enable DLL reset.
This value is used during the power-up sequence.
Note: This field is found only in DDR1-SDRAM devices.
• DIC/DS: Output Driver Impedance Control:
Reset value is 0.
This field defines the output drive strength.
0 = Normal driver strength.
1 = Weak driver strength.
This value is used during the power-up sequence. This parameter is found in the datasheet as DIC or DS.
Note: This field is found only in DDR2-SDRAM devices.
• DIS_DLL: Disable DLL
0 = Enable DLL
1 = Disable DLL
• OCD: Off-chip Driver
Reset value is 3’b111.
Note: OCD is NOT supported by the controller, but these values MUST be programmed during the initialization sequence.
6438F–ATARM–21-Jun-10
OCD
CAS
000
001
010
011
100
101
110
111
000
111
DDR2 CAS Latency
OCD calibration mode exit, maintain setting
OCD calibration default
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
3
SDR CAS Latency
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
2
3
AT91SAM9G45
263