DF2437FV Renesas Electronics America, DF2437FV Datasheet - Page 132

• Manufacturer Part Number: DF2437FV
• Description: IC H8S/2437 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of DF2437FV

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

5.7.5
IRQ input pins can be selected from port control register 1 (PTCNT1). For details on selectable
pins, refer to section 7, I/O Ports.
When the PTCNT1 setting is changed, an edge occurs internally and the IRQnF bit (n = 0 to 7) of
ISR may be set to 1 at the unintended timing if the selected pin level before the change is different
from the selected pin level after the change. If the IRQn interrupt request (n = 0 to 7) is enabled,
the interrupt exception handling is executed. To prevent the unintended interrupt, ITSR setting
should be changed while the IRQn interrupt request is disabled, then the IRQnF bit should be
cleared to 0.
5.7.6
Since IRQnF flags may be set to 1 depending on the pin states after a reset, be sure to read from
ISR after a reset and then write 0 to clear the IRQnF flags.
Rev.2.00 May. 28, 2009 Page 92 of 732
REJ09B0059-0200
IRQ Pin Select
Note on IRQ Status Register (ISR)