DF2437FV Renesas Electronics America, DF2437FV Datasheet - Page 446

• Manufacturer Part Number: DF2437FV
• Description: IC H8S/2437 MCU FLASH 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2400r

Specifications of DF2437FV

• Core Processor: H8S/2600
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

13.4.5
By using the timer connection and TMR1, the fall of the IVI signal can be shifted backward by the
specified number of IHI signal waveforms. Also, the fall of the IVI signal can be synchronized
with the rise of the IHI signal. Figure 13.12 shows a block diagram for IVI signal fall modification
and IHI signal operation.
To measure of the 8-bit timer divided waveform period, TCNT of the TMR1 is set to count
external clock (IHI signal) pulses, and to be cleared on the rising edge of the external reset signal
(inverse of the IVI signal). The number of IHI signal pulses until the fall of the IVI signal is
written to TOCRB.
Since the IVI signal supplied to the IVO signal selection circuit is normally set on the rise of the
IVI signal and reset on the fall, its waveform is the same as that of the original IVI signal. When
fall modification is selected, a reset is performed on a TCORB compare-match of the TMR1.
Rev.2.00 May. 28, 2009 Page 406 of 732
REJ09B0059-0200
IHI signal
(without 2fH
modification)
IHI signal
(with 2fH
modification)
Mask interval
ICRD + OCRDM × 2
ICRD + OCRDM
IVI Signal Fall Modification and IHI Synchronization
FRC
ICRD
Figure 13.11 2fH Modification Timing Chart