HD6417706 RENESAS [Renesas Technology Corp], HD6417706 Datasheet - Page 407

• Manufacturer Part Number: HD6417706
• Description: Renesas 32-Bit RISC Microcomputer Super RISC engine Family/SH7700 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Bit
4
Bit Name
FER
Initial Value
0
R/W
R/(W)* Framing Error
Description
Indicates that data reception aborted due to a
framing error in the asynchronous mode.
0: Receiving is in progress or has ended normally
1: A receive framing error occurred
[Clearing conditions]
1.
2.
Note: Clearing the RE bit to 0 in the serial
[Setting condition]
When the SCI has completed receiving, the stop
bit at the end of receive data is checked and
found to be 0.
Note: When the stop bit length is two bits, only
the first bit is checked. The second stop bit is
not checked. When a framing error occurs, the
SCI transfers the receive data into the SCRDR
but does not set RDRF. Serial receiving cannot
continue while FER is set to 1. In the clock
synchronous mode, serial transmitting is also
disabled.
The chip is reset or enters standby mode.
FER is read as 1, then written to with 0.
control register does not affect the FER bit,
which retains its previous value.
Rev. 4.00, 03/04, page 361 of 660