MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 266

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Clock Module
11.8.5 Clock Operation During Reset
11.8.6 PLL Operation
Advance Information
266
To exit reset in PLL mode, the reference must be present, and the PLL
must acquire lock.
In external clock mode, the system is static and does not recognize reset
until a clock is applied to EXTAL.
In PLL mode, the PLL operates in self-clocked mode (SCM) during reset
until the input reference clock to the PLL begins operating within the
limits given in the electrical specifications.
If a PLL failure causes a reset, the system enters reset using the
reference clock. Then the clock source changes to the PLL operating in
SCM. If SCM is not functional, the system becomes static. Alternately, if
the LOCEN bit in SYNCR is clear when the PLL fails, the system
becomes static. If external reset is asserted, the system cannot enter
reset unless the PLL is capable of operating in SCM.
In PLL mode, the PLL synthesizes the system clocks. The PLL can
multiply the reference clock frequency by 2x to 9x, provided that the
system clock (CLKOUT) frequency remains within the range listed in
electrical specifications. For example, if the reference frequency is
2 MHz, the PLL can synthesize frequencies of 4 MHz to 18 MHz. In
addition, the RFD can reduce the system frequency by dividing the
output of the PLL. The RFD is not in the feedback loop of the PLL, so
changing the RFD divisor does not affect PLL operation.
Figure 11-8
with example component values. Actual component values depend on
crystal specifications.
Freescale Semiconductor, Inc.
For More Information On This Product,
shows the external support circuitry for the crystal oscillator
Go to: www.freescale.com
Clock Module
MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
MOTOROLA