MMC2114CFCAG33 Freescale Semiconductor, MMC2114CFCAG33 Datasheet - Page 608

• Manufacturer Part Number: MMC2114CFCAG33
• Description: IC MCU 32BIT 33MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2114CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 67
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2114
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 104
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Controller Family/series: MCORE
• No. Of I/o's: 104
• Ram Memory Size: 32KB
• Cpu Speed: 33MHz
• No. Of Timers: 2
• Embedded Interface Type: SCI, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

JTAG Test Access Port and OnCE
22.14.16 OnCE Commands
22.14.17 Target Site Debug System Requirements
22.14.18 Interface Connector for JTAG/OnCE Serial Port
Advance Information
608
The OnCE commands can be classified as:
A typical debug environment consists of a target system in which the
MCU resides in the user-defined hardware.
The external command controller acts as the medium between the MCU
target system and a host computer. The external command controller
circuit acts as a serial debug port driver and host computer command
interpreter. The controller issues commands based on the host
computer inputs from a user interface program which communicates
with the user.
Figure 22-17
requirements for debug controllers that access the JTAG/OnCE port.
The connector has two rows of seven pins with 0.1-inch center-to-center
spacing between pins in each row and each column.
•
•
•
Freescale Semiconductor, Inc.
For More Information On This Product,
Read commands (the device delivers the required data)
Write commands (the device receives data and writes the data in
one of the OnCE registers)
Commands with no associated data transfers
JTAG Test Access Port and OnCE
Go to: www.freescale.com
shows the recommended connector pinout and interface
MMC2114 • MMC2113 • MMC2112 — Rev. 1.0
MOTOROLA