D12321VF25V Renesas Electronics America, D12321VF25V Datasheet - Page 922

• Manufacturer Part Number: D12321VF25V
• Description: IC H8S/2300 MCU ROMLESS 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12321VF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 86
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 19 ROM
19.29
19.29.1 PROM Mode Setting
Programs and data can be written and erased in PROM mode as well as in the on-board
programming modes. In PROM mode, the on-chip ROM can be freely programmed using a
PROM programmer that supports the Renesas microcomputer device type with 512-kbyte on-chip
flash memory (FZTAT512V3A). Flash memory read mode, auto-program mode, auto-erase mode,
and status read mode are supported with this device type. In auto-program mode, auto-erase mode,
and status read mode, a status polling procedure is used, and in status read mode, detailed internal
signals are output after execution of an auto-program or auto-erase operation.
Table 19.55 shows PROM mode pin settings.
Table 19.55 PROM Mode Pin Settings
Pin Names
Mode pins: MD2, MD1, MD0
Mode setting pins: P66, P65, P64
FWE pin
STBY pin
RES pin
XTAL, EXTAL pins
Other pins requiring setting: P32, P25
Rev.6.00 Sep. 27, 2007 Page 890 of 1268
REJ09B0220-0600
Flash Memory PROM Mode
Settings/External Circuit Connection
Low-level input
High-level input to P66, low-level input to P65 and P64
High-level input (in auto-program and auto-erase
modes)
High-level input (do not select hardware standby mode)
Reset circuit
Oscillator circuit
High-level input to P32, low-level input to P25