D12321VF25V Renesas Electronics America, D12321VF25V Datasheet - Page 957

• Manufacturer Part Number: D12321VF25V
• Description: IC H8S/2300 MCU ROMLESS 128QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of D12321VF25V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: POR, PWM, WDT
• Number Of I /o: 86
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 128-QFP
• For Use With: EDK2329 - DEV EVALUATION KIT H8S/2329
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

21.2.3
MSTPCR is a 16-bit readable/writable register that performs module stop mode control.
MSTPCR is initialized to H'3FFF by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Bits 15 to 0—Module Stop (MSTP15 to MSTP0): These bits specify module stop mode. See
table 21.3 for the method of selecting on-chip supporting modules.
Bits 15 to 0
MSTP15 to MSTP0
0
1
21.3
When the SCK2 to SCK0 bits in SCKCR are set to 1, the operating mode changes to medium-
speed mode as soon as the current bus cycle ends. In medium-speed mode, the CPU operates on
the operating clock (φ/2, φ/4, φ/8, φ/16, or φ/32) specified by the SCK2 to SCK0 bits. The bus
masters other than the CPU (the DMAC * and DTC) also operate in medium-speed mode. On-chip
supporting modules other than the bus masters always operate on the high-speed clock (φ).
In medium-speed mode, a bus access is executed in the specified number of states with respect to
the bus master operating clock. For example, if φ/4 is selected as the operating clock, on-chip
memory is accessed in 4 states, and internal I/O registers in 8 states.
Medium-speed mode is cleared by clearing all of bits SCK2 to SCK0 to 0. A transition is made to
high-speed mode and medium-speed mode is cleared at the end of the current bus cycle.
If a SLEEP instruction is executed when the SSBY bit in SBYCR is cleared to 0, a transition is
made to sleep mode. When sleep mode is cleared by an interrupt, medium-speed mode is restored.
Bit
Initial value :
R/W
Module Stop Control Register (MSTPCR)
Medium-Speed Mode
:
: R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W
15
0
14
0
Description
Module stop mode cleared
Module stop mode set
13
1
MSTPCRH
12
1
11
1
10
1
9
1
8
1
Rev.6.00 Sep. 27, 2007 Page 925 of 1268
7
1
6
1
Section 21 Power-Down Modes
5
1
MSTPCRL
4
1
REJ09B0220-0600
3
1
2
1
1
1
0
1