EFM32G200F16 Energy Micro, EFM32G200F16 Datasheet - Page 360

• Manufacturer Part Number: EFM32G200F16
• Description: MCU 32BIT 16KB FLASH 32-QFN
• Manufacturer: Energy Micro
• Series: Geckor

Specifications of EFM32G200F16

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 4x12b, D/A 1x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad
• Processor Series: EFM32G200
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 2
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

25.5.13 ADCn_SCANDATAP - Scan Sequence Result Data Peek Register
25.5.14 ADCn_CAL - Calibration Register
31:0
31
30:24
23
22:16
15
14:8
7
6:0
Offset
0x030
Reset
Access
Name
Bit
Offset
0x034
Reset
Access
Name
Bit
2010-09-06 - d0001_Rev1.00
DATAP
The register holds the results from the last scan conversion. Reading this field will not clear SCANDV in ADCn_STATUS or single
DMA request.
Reserved
SCANGAIN
This register contains the gain calibration value used with scan conversions. This field is set to the production gain calibration value
for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is unsigned. Higher
values lead to higher ADC results.
Reserved
SCANOFFSET
This register contains the offset calibration value used with scan conversions. This field is set to the production offset calibration
value for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is encoded as
a signed 2's complement number. Higher values lead to lower ADC results.
Reserved
SINGLEGAIN
This register contains the gain calibration value used with single conversions. This field is set to the production gain calibration value
for the 1V25 internal reference during reset, hence the reset value might differ from device to device. The field is unsigned. Higher
values lead to higher ADC results.
Reserved
SINGLEOFFSET
Name
Name
0x00000000
0x3F
0x00
0x3F
0x00
Reset
Reset
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
To ensure compatibility with future devices, always write bits to 0. More information in Section 2.1 (p. 3)
R
RW
RW
RW
RW
Access
Access
...the world's most energy friendly microcontrollers
360
Bit Position
Bit Position
Scan Conversion Result Data Peek
Scan Mode Gain Calibration Value
Scan Mode Offset Calibration Value
Single Mode Gain Calibration Value
Single Mode Offset Calibration Value
Description
Description
www.energymicro.com