PIC18F97J60-I/PF Microchip Technology, PIC18F97J60-I/PF Datasheet - Page 183

• Manufacturer Part Number: PIC18F97J60-I/PF
• Description: IC PIC MCU FLASH 65KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F97J60-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 41.667MHz
• Connectivity: EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 70
• Ram Size: 3808 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3808 B
• Interface Type: Display Driver/Ethernet/EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 41.667 MHz
• Number Of Programmable I/os: 70
• Number Of Timers: 5
• Operating Supply Voltage: 2.35 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136, DM183033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Package: 100TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 41.667 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162064 - HEADER INTFC MPLABICD2 64/80/100DM163024 - BOARD DEMO PICDEM.NET 2
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

16.0
Members of the PIC18F97J60 family of devices all have
a total of five CCP (Capture/Compare/PWM) modules.
Two of these (CCP4 and CCP5) implement standard
Capture, Compare and Pulse-Width Modulation (PWM)
modes and are discussed in this section. The other three
modules
standard Capture and Compare modes, as well as
Enhanced PWM modes. These are discussed in
Section 17.0
(ECCP) Modules”.
Each CCPx/ECCPx module contains a 16-bit register
which can operate as a 16-Bit Capture register, a 16-Bit
Compare register or a PWM Master/Slave Duty Cycle
REGISTER 16-1:
© 2006 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-6
bit 5-4
bit 3-0
U-0
—
CAPTURE/COMPARE/PWM
(CCP) MODULES
(ECCP1,
“Enhanced
Unimplemented: Read as ‘0’
DCxB1:DCxB0: CCPx Module PWM Duty Cycle bit 1 and bit 0
Capture mode:
Unused.
Compare mode:
Unused.
PWM mode:
These bits are the two Least Significant bits (bit 1 and bit 0) of the 10-bit PWM duty cycle. The eight
Most Significant bits (DCxB9:DCxB2) of the duty cycle are found in CCPRxL.
CCPxM3:CCPxM0: CCPx Module Mode Select bits
0000 = Capture/Compare/PWM disabled (resets CCPx module)
0001 = Reserved
0010 = Compare mode; toggle output on match (CCPxIF bit is set)
0011 = Reserved
0100 = Capture mode; every falling edge
0101 = Capture mode; every rising edge
0110 = Capture mode; every 4th rising edge
0111 = Capture mode; every 16th rising edge
1000 = Compare mode; initialize CCPx pin low; on compare match, force CCPx pin high
1001 = Compare mode; initialize CCPx pin high; on compare match, force CCPx pin low
1010 = Compare mode; generate software interrupt on compare match (CCPxIF bit is set,
1011 = Reserved
11xx = PWM mode
U-0
—
ECCP2,
CCPxCON: CCPx CONTROL REGISTER (CCP4 AND CCP5)
(CCPxIF bit is set)
(CCPxIF bit is set)
CCPx pin reflects I/O state)
Capture/Compare/PWM
W = Writable bit
‘1’ = Bit is set
ECCP3)
DCxB1
R/W-0
implement
DCxB0
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
CCPxM3
PIC18F97J60 FAMILY
R/W-0
register. For the sake of clarity, all CCPx module oper-
ation in the following sections is described with respect
to CCP4, but is equally applicable to CCP5.
Capture and Compare operations described in this
chapter apply to all standard and Enhanced CCPx
modules. The operations of PWM mode, described in
Section 16.4 “PWM Mode”, apply to CCP4 and CCP5
only.
Note: Throughout this section and Section 17.0
“Enhanced Capture/Compare/PWM (ECCP)
Modules”, references to register and bit
names that may be associated with a specific
CCP module are referred to generically by the
use of ‘x’ or ‘y’ in place of the specific module
number. Thus, “CCPxCON” might refer to the
control register for ECCP1, ECCP2, ECCP3,
CCP4 or CCP5.
CCPxM2
R/W-0
x = Bit is unknown
CCPxM1
R/W-0
DS39762B-page 181
CCPxM0
R/W-0
bit 0